User manual BARTSCHER 131660

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. The unit should be placed in a manner that assures the proper circulation of air in order to guarantee the cooling properties of the unit. A minimum space of 5 cm from walls and other objects should be maintained. Do not place the unit in locations with high air humidity or high temperatures, because these factors can damage the unit. Before the first use the unit should stand for at least 2 hours before it is connected to the power source. The electrical circuit in the socket must be secured to at least 16A. Only connect the unit directly to the wall socket; do not use any extension cords or power strips. Position the device in a way so that the power plug is always accessible. Before use, clean the inside and outside of the unit with a moist, soft cloth. Wash the movable condensation collector and insert it again into the unit. The optimum temperature for drinks located on the unit can be set using the thermoregulators located in the back of the unit. If for the next 10 seconds no button is pressed, the temperature inside the unit will be displayed. [. . . ] If needed, before the final closure of the casing, adjust the placement of the pouring taps. Chilled drinks can be poured from Bagin-Box containers if needed. Thanks to the height at which the pouring taps are located, glasses and decanters can be easily filled. In order to easier differentiate containers for drinks placed in the Bartscher company "vinoBar" refrigerator with a distributor for Bag-In-Box type drinks, we enclose a single selfadhesive magnetic tape as a free sample. [. . . ]