User manual BARTSCHER 150.310

[. . . ] This symbol highlights instructions, which should be followed to avoid any risk of damage, malfunctioning and/or breakdown of the device. This symbol highlights tips and information, which have to be followed for an efficient and trouble-free operation of the device. This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! [. . . ] Do not use the electric double hot plate to: heat enclosed spaces; heat flammable, dangerous or volatile liquids or solids. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. ON-/OFF knob Left hot plate Right hot plate Power cord Temperature regulator ­ right hot plate Adjustable legs Right hot plate control light (orange) Left hot plate control light (orange) Adjustable legs Temperature regulator ­ left hot plate The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. During operation some elements of the device very become hot. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Do not lay the cable over carpets or heat insulations. Keep away the cable from operating range and do not dunk it into water. [. . . ] A damaged cable must immediately be replaced by customer service or a qualified electrician to avoid dangers. O In case of damage or malfunction, please contact your stockist or our customer service centre. O Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. At the end of its service life the discarded device has to be disposed in accordance with the national regulations. [. . . ]