User manual BARTSCHER 150.710

[. . . ] To protect against electrical shock, do not immerse cord, plug, or blender base in water or any other liquid. ⷠDo not spray the base with a high-pressure spray gun. [. . . ] ⷠDo not leave blender unattended while it is operating. ⷠTo prevent damage to blender, container, or cutter assembly, DO NOT move or shake blender while in operation. If blending action stops during operation, turn blender OFF (O), remove container from base, remove container cover, and use a thin rubber spatula to push mixture towards cutters. ⷠTo prevent burns from hot liquids splashing out of the container, always remove the filler cap of the container cover before blending hot liquids. Keep hands and other exposed skin away from the cover opening to reduce risk of possible injury. ⷠDo not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Always operate blender with container cover in place. ⷠIf the supply cord of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. If you need a replacement fuse carrier, it must be replaced with the same colour coded carrier with the same markings. Fuse covers and carriers can be obtained from approved service agents. When using electrical appliances, basic safety precautions should be followed, including Failure to follow these instructions can result in death or electrical shock. 8 liter) of clean, cool water (60°F/16°C), mixed according to the instructions on the bleach. [. . . ] Please do not dispose of any electrical equipment as ordinary waste. Help conserve natural resources and protect the environment: when you have finished using this product, please dispose of it at your local waste colleciton or recycling center in the area reserved for electrical equipment. [. . . ]