User manual BARTSCHER 150.712

[. . . ] To protect against electrical shock, do not immerse cord, plug, or blender base in water or any other liquid. â· Do not spray the base with a high-pressure spray gun. [. . . ] â· To prevent damage to blender, container, or cutter assembly, DO NOT move or shake blender while in operation. If blending action stops during operation, turn blender OFF (O), remove container from base, remove container cover, and use a thin rubber spatula to push mixture towards cutters. Hot liquids may push lid off jar during blending. To prevent possible burns: Do not fill blender jar beyond the 1 quart (1 liter) level. with the protection of an oven mitt or thick towel , place one hand on top of lid. Always operate blender with container cover in place. â· This blender is designed with motor overload protection. If the motor stops during operation due to overheating, unplug the unit and allow it to cool down for 15 minutes. The normal function of this product may be disturbed by strong electromagnetic interference. If this occurs, simply reset the product and resume normal operation by following the operation manual. If normal operation cannot be resumed, place the product in a different location. â· Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. If the supply cord of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. If you need a replacement fuse carrier, it must be replaced with the same colour coded carrier with the same markings. [. . . ] Please do not dispose of any electrical equipment as ordinary waste. Help conserve natural resources and protect the environment: when you have finished using this product, please dispose of it at your local waste colleciton or recycling center in the area reserved for electrical equipment. [. . . ]