User manual BARTSCHER 150340

[. . . ] This symbol highlights instructions, which should be followed to avoid any risk of damage, malfunctioning and/or breakdown of the device. This symbol highlights tips and information, which have to be followed for an efficient and trouble-free operation of the device. All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. [. . . ] The manufacturer and/or authorized parties do not accept any claims resulting from damage caused by using the device not according to its intended use. The operator is totally liable for any such damage. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. During operation some parts of the device become very hot. In order to avoid injuries do not touch any hot parts!Do not use the device if it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user, or lead to damage of the device or personal injury, and furthermore invalidate the warranty. Do not lay the cable over carpets or heat insulations. Keep the cable away from operating range and do not dunk it into water. [. . . ] Therefore, you must not use any kind of pressure water jet for cleaning the device!Do not clean the device under running water, do not immerse in any liquid and protect connecting socket against ingress of water. Let the device cool off first before removing the temperature control as the temperature sensor of the temperature control might still be hot after use. O Put the thermostat in the OFF position, remove the plug from its socket and then remove the thermostat only after the unit cools. [. . . ]