User manual BARTSCHER 150340-188

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] the hot water dispenser is designed exclusively to heat water and maintain water temperature. The hot water dispenser must not be used to: Boiling up or brewing liquids containing sugar, sweeteners, acids, leaches or alcohols Filling in or heating inflammable, noxious, easily volatilizing or similar liquids or substances or materials. Do not use the device for anything beyond or other than its intended use. The manufacturer and/or authorized parties do not accept any claims resulting from damage caused by using the device not according to its intended use. The operator is totally liable for any such damage. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. Only connect the unit directly to the wall socket; do not use any extension cords or power strips. Position the device in a way so that the power plug is always accessible. Priori to the first use, rinse the device with warm water and mild detergent. Next, fill the water tank with drinking water (up to , , MAX" level). In order to shorten the water heating stage, use hot water. Place the cover on the water tank and turn clockwise to close the tank. Drinking water must always be in the tank before it is disconnected. Do not fill the tank with such liquids as acids, lye, oils or nitrates!Turn on the device with the ON/OFF switch. set the temperature with the temperature control. The red, heating function light will light up. [. . . ] In such a case, empty the tank and leave the device to cool. After removing scale, the device can be switched on. Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug!Do not use any acid agents and make sure no water ingresses the device. [. . . ]