User manual BARTSCHER 203.520 PARTS LIST

[. . . ] 37 2 Contents Additional options . 54 General problems with the dishwasher . 73 Cleaning the drain pump and non-return valve . 78 3 IMPORTANT SAFETY INSTRUCTIONS WARNING ­ When using your dishwasher, follow basic precautions, including the following: Electrical Safety ~ Before installation, make sure that Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. [. . . ] Switch to the main menu by pressing "Clear". } Settings F } Sensor Wash Main menu r ^ Select Settings J. The display changes into the menu "Settings J". } Language F } Time of day Settings r ^ Select the menu option you would like to change. Press the : button to see more information about the option currently selected. The selected options in the submenus are marked with a check L. 41 Settings ! Language J The display contents can be shown in different languages. The displayed language can be changed by the submenu Language J. ^ Select the desired language and confirm with OK. The flag behind the word Language J serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag until the submenu Language J appears. Time of day This selection allows the clock to be shown as 24 or 12 hours. Setting the clock format ^ Select Format. ^ Select the desired clock format and confirm with OK. Set the time of day ^ Select Set manually. ^ Set the hour with +/- and confirm with OK. The dosage set by default to 3 ml of rinse aid per program. ­ Use a higher setting if spots appear on dry glassware. ­ Use a lower setting if streaking appears on dishes or glasses. ^ Use the +/- buttons to selected the desired rinse aid amount and confirm with OK. Filter check This selection allows you to set the number of cycles run before the filter check message shows. You can select between 30 and 60 cycles. The filter check message is set by default to 40 cycles. ^ Select the desired number of cycles and confirm with OK. See "Cleaning and Care - Triple filter system" for more information. Adjust Sensor Wash The "Sensor Wash" program can be adjusted to clean stubborn but normal soiling. ^ Select Yes and confirm with OK . 45 Settings ! Reorganize program list The order of the programs in the program list can be reorganized. The two most frequently used programs can be saved to the first two positions. } Sensor Wash B } Cancel Select program for position 1 e Continue } ^ Select with e the program which you would like to save to the first position of the main menu. Confirm the selection with the button next to the program. [. . . ] This can be directly connected to a water supply with 3/4" MHT (male hose thread ends). ­ Water pressure: Must be between 4. 5 145 psi (0. 3 - 10 bar). If the water pressure is lower, the display shows Water intake see "Frequently asked questions". With high water intake pressure, a reducing valve must be used. Connection to the water supply , Do not drink water from the dishwasher! ­ The dishwasher can heat its own water to the temperature required by the wash program. [. . . ]