User manual BARTSCHER 203510-198

[. . . ] If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washer-dryer. Connecting the electricity and water supplies Connecting the water inlet hose Unpacking and levelling Unpacking 1. Remove the washer-dryer from its packaging. Make sure that the washer-dryer has not been damaged during the transportation process. [. . . ] The DOOR LOCKED indicator light will switch 9. At the end of the wash cycle the off, indicating that the door may be opened. Take out your laundry and leave the appliance door ajar to make sure the drum dries completely. Switch the washer-dryer off by pressing the ON/OFF button. 9 Wash cycles GB Table of wash cycles Wash cycles Description of the wash cycle Max. Mix 30':To refresh lightly soiled garments quickly (not suitable for wool, 4 silk and clothes which require washing by hand). Mix 15': To refresh lightly soiled garments quickly (not suitable for wool, 5 silk and clothes which require washing by hand). Partials wash cycles A Rinse B Spin C Drain no spin Drying cycles 11 Cotton drying 12 Synthetics drying 13 Wool drying For all Test Institutes: 1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 6 with a temperature of 60°C. 2) Long wash cycle for cottons: set wash cycle 1 with a temperature of 40°C. 3) Short wash cycle for cottons: set wash cycle 2 with a temperature of 40°C. The information contained in the table is intended as a guide only. If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the load. B: When the drying is complete there is a cooling period, even though the DRYING knob is in the Setting the temperature GB Setting the drying cycle Table of Drying times Fabric type Load type (guideline values) Max. Cupboard Henger Iron Drying only Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the desired drying duration using the DRYING knob. Functions The various wash functions available with this washer-dryer will help to achieve the desired results, every time. Press the button corresponding to the desired function; 2. The function is enabled when the corresponding indicator light is illuminated. Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle. Delay timer This timer delays the start time of the wash cycle by up to 9 hours. Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. [. . . ] a delayed start has been set (see “Personalisation”). The water inlet hose is not connected to the tap. The START/PAUSE button has not been pressed. The washer-dryer does not take in water (the indicator light for the first wash cycle stage flashes rapidly). [. . . ]