User manual BARTSCHER 286603 CONTROL PLAN

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer. While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://my. okidata. com Trademark Information _______________________________ Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] On the hard disk select Applications>Utilities folder, and double-click Printer Setting Utility. (For Mac OS X 10. 2 or earlier, select the Print Center. Click Add (Add the printer, for Mac OS X 10. 1. 5 or earlier). Make sure that the printer name is shown in the Printer List. Select Views>Network port Setting and make sure Internal Ethernet is checked. Select Views>Internal Ethernet on the TCP/IP tab. and click Apply now. Install the Printer Driver: 1. 5. TCP/IP Protocol NOTE: Select Refer to DHCP Server if IP Address is automatically obtained from the DHCP server. Set the IP Address in the printer: B4400/4500/4550/4600 User's Guide 61 NOTE: Proceed to Install the Printer Driver if the IP address has been set in Windows or obtained automatically. Press the Menu button several time to display NETWORK. Press the Item+ or Item- several times to display TCP/IP ENABLE. Click Add. Install the Printer Driver: 1. 9. A printer name is "BARTSCHER B4500n" plus the last 6 digits of the MAC address. 10. 11. Make sure that the printer name is shown in the Printer List. Close the Printer Setting Utility. B4400/4500/4550/4600 User's Guide 63 Setup for Mac OS X via USB Connection Requirements: A Macintosh computer Rev 8. 1 to 9. 2. 2 and Mac OSX. Connecting a Cable A printer cable is not supplied with the printer. Turn off the Macintosh and the printer. S M Printer State tab. jpg 1 2. 3. Insert a USB cable into the USB interface connector (1) of the printer. Insert the other end of the cable into the USB interface connector of the Macintosh. Setup 1. Double-click Installer for Mac OS X in the Driver folder. Input administrator's name and click OK. B4400/4500/4550/4600 User's Guide 64 7. 8. Follow the on-screen instructions to install. Select Applications on the hard disk Utilities folder, and double-click Printer Setting Utility in the folder (doubleclick Printer Center in the Utilities folder of Applications for Mac OS x 10. 2 or earlier version). [. . . ] Adjust software accordingly, or set LINES Per PAGE in the soft control panel to equal lines per page in your software. Hardware problems Symptom Graphic image prints partly on one page, partly on the next. When you try to print nothing happens, but printer indicates it is ready to receive data. Garbage prints. Problem Insufficient printer memory for this image at this resolution. Solution Change the resolution, reduce the image size, or install more memory in your printer. Configuration error. If more than one printer is available, make sure your printer has been selected. Incorrect cable configuration. [. . . ]