User manual BARTSCHER 700201G-174

[. . . ] Important Safety Instructions for you and your family. Pre-Installation 2 Installation (pages 6-7-8) Installation, after delivery or transport, is the most important operation for the correct functioning of your washing machine. That the inlet and drain hoses are connected correctly. Never use hoses that have already been used. [. . . ] For more delicate garments: protect underwear, tights and stockings and delicate items by placing them in a canvas pouch www. Us Instructions for installation and use 9 Making the right choice is important. Here I’m in control E F Washer knob and Delay start Use this knob to select the wash program. To select a program, you should turn the knob so that the word/ number of the desired program is in line with the pointer on the knob. now press on/off button L (position I) , pilot lamp M will start flashing. After 5 seconds, the setting will be accepted, pilot lamp M will stop flashing (staying lit) and the wash cycle will begin. If you want to interrupt the program in progress or set a new one, select one of the Reset positions and wait 5 seconds. When the cancellation has been accepted, pilot lamp will flash 5 times, and you can then turn the appliance off. Just press them lightly in the middle to extract them. D C B A Temperature control knob It is used to set the wash temperature in the recommended program table on pg. It also allows you to reduce the temperature recommended for the selected program, and even to set a cold wash cycle. On-Off lamp Door lock (Status) Lamp M flashes slowly when the appliance is switched on and awaiting instructions and at the end of a cycle, indicating that the door can be opened. It flashes quickly when the door should not be opened. A steady light means the appliance has accepted the selected programme. Drying cycle lamp When this lamp is on, it means that knob C has been set on a drying cycle and at the end of the wash cycle, the appliance will run the selected tumble drying cycle. A program for all seasons Type of fabric and degree of soil DELAY TIMER 12h 9h 3h 1h 12 - 9 - 3 - 1 hour delay Stop/Reset Program knob Wash temperature knob Pre-wash Detergent for wash Fabric softener Bleach Length of the cycle (minutes) Description of wash cycle Start is delayed by 12 - 9 - 3 - 1 hours Interrupts/Cancels the selected program COTTON Exceptionally soiled whites (sheets, tablecloths, etc. ) 1 2 3 Heavy Regular Light K K K K K K K K K K K K K 90 50 40 25 13 Wash cycle , rinse cycles , intermediate and final spin cycles Wash cycle , rinse cycles , intermediate and final spin cycles Heavily soiled whites and fast colors Slightly soiled whites and delicate colors (shirts , jumpers , etc. ) Rinse cycles Spin cycle Wash cycle , rinse cycles, intermediate and final spin cycles Rinse cycles, intermediate and final spin cycles Draining and final spin cycle Drying Interrupts/Cancels the selected program Drying cycle for cotton fabrics Stop/Reset PERMANENT PRESS Heavily soiled fast color synthetics (baby linen, etc. ) 1 2 3 Heavy Regular Light K K K K K K K K K K K K K 90 50 40 25 13 Wash cycle , rinse cycles , intermediate and final spin cycles Wash cycle , rinse cycles , intermediate and final spin cycles Heavily soiled whites and fast colors Slightly soiled whites and delicate colors (shirts , jumpers , etc. ) 7 8 9 Light Silk Wool K K K K K K K K K 64 60 45 Delicates , rinse cycles, Easy Iron or draining Wash cycle , rinse cycles, Easy Iron or draining Wool Rinse cycles Spin cycle Drain Wash cycle , rinse cycles and delicate spin cycle Rinse cycles, Easy Iron or draining Draining and delicate spin cycle (Silk excluded) Draining Drying Interrupts/Cancels the selected program Drying cycle for hand washables Stop/Reset Notes. For the anti-crease function: see Easy iron, opposite page. The information contained in the table is purely indicative IMPORTANT: TO CANCEL THE WASH PROGRAM YOU HAVE JUST SET, SET THE WASHER KNOB TO THE “RESET” POSITION AND WAIT FOR AT LEAST 5 SECONDS. [. . . ] Then ease the top edge forward to allow it to be lifted clear (Fig. Place a shallow dish or tray below the cover of the pre-chamber to catch any water that might be present. Open the cover by turning it counter-clockwise (Fig. When finished cleaning, ensure that the cover is securely tightened. [. . . ]