User manual BARTSCHER A120956

[. . . ] Levelling your appliance correctly will provide it with stability and avoid any vibrations, noise and shifting during operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the washing machine. Check whether the washing machine has been damaged during transport. If this is the case, do not install it and contact your retailer. [. . . ] ) 1 2 3 4 5 90°C 90°C 60°C 40°C 40°C • • • • • • • • • • • 137 120 105 120 72 Pre-wash, wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, anti-crease or delicate spin cycle Wash cycle, rinse cycles, anti-crease or delicate spin cycle Wash cycle, rinse cycles, anti-crease or delicate spin cycle Wash cycle, rinse cycles, anti-crease or delicate spin cycle Wash cycle, rinse cycles and delicate spin cycl Wash cycle, rinse cycles and delicate spin cycle Wash cycle, rinse cycles, anti-crease or draining cycle Rinse cycles and spin cycle Rinse cycles, anti-crease or draining Draining and heavy duty spin cycle Draining and delicate spin cycle Draining Synthetics Heavily soiled fast colours (baby linen, etc. ) PARTIAL PROGRAMMES Rinse Delicate rinse cycle Spin cycle Delicate spin cycle Draining • • 10 11 40°C 30°C • • • • 50 45 Notes For the anti-crease function: see Easy iron, opposite page. The information contained in the table is purely indicative. Special programmes Daily 30' (programme 9 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it only lasts 30 minutes and allows you to save on both time and energy. By setting this programme (9 at 30°C), you can wash different fabrics together (except for woollen and silk items), with a maximum load of 3 kg. we recommend the use of liquid detergent. 30 Personalisations Setting the temperature GB Installation Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 30). The temperature can be lowered, or even set to a cold wash ( ). Turn the SPIN SPEED knob to set the spin speed for the programme selected. The maximum spin speeds for each programme are as follows: Programmes Maximum spin speed Cottone 1200 rpm Synthetics 800 rpm Wool 600 rpm Silk no . The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each programme. Turn the garments inside out and load a maximum of 2-3 kg, repeating the rinse cycle once or twice and using the delicate spin cycle. They can be washed together with jeans and other tough garments, but not with whites. Wool: for best results, use a specific detergent, taking care not to exceed a load of 1, 5 kg. Cashmere Platinum compartment 1: Detergent for pre-wash (powder) compartment 2: Detergent for the wash cycle (powder or liquid) Liquid detergent should only be poured in immediately prior to the wash cycle start. compartment 3: Additives (fabric softeners , etc. ) The fabric softener should not overflow from the grid. Ariston sets a new standard of superior performance that has been endorsed by The Woolmark Company with the prestigious Woolmark Platinum Care brand. • Never force the washing machine door: this could damage the safety lock mechanism designed to prevent any accidental openings. • In the event of a malfunction, do not under any circumstances touch internal parts in order to attempt repairs. • Always keep children well away from the appliance while in operation. • The appliance door tends to get quite hot during the wash cycle. [. . . ] gB Installation Problem The washing machine won't start. Possible causes/Solution: • The appliance is not plugged into the socket, or not enough to make contact. The The START/RESET button has not been pressed. A delayed start has been set (using the Delay Timer, see page 31). [. . . ]