User manual BARTSCHER A150670

[. . . ] This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and generally applicable safety regulations. The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning. [. . . ] In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. The housing made of chromium and nickel steel, plates made of cast iron 50° - 300° C 50 Hz 1800 W The housing made of chromium and nickel steel, plates made of cast iron 50° - 300° C 230 V 50 Hz 3600 W The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. During operation some elements of the unit very become hot. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Do not lay the cable over carpets or heat insulations. Keep away the cable from operating range and do not dunk it into water. Do not move or tilt the device when in operation. Never remove the casing and never modify the degvice yourself!Before installation the local power grid specification should be compared with that of the device (see type label). connect the device only in case of compliance! [. . . ] Protect your hands and face from possible fat splashes. Do not use any hard or sharp object on the grill to prevent damage to the surface or the operating elements. Put the temperature control knob to "0" once you are finished grilling. Remove the grilled food and pull the mains plug. [. . . ]