User manual BARTSCHER A151.5001

[. . . ] This symbol highlights instructions which should be followed to avoid any risk of damage, malfunctioning and/or breakdown of the device. This symbol highlights tips and information which have to be followed for an efficient and trouble-free operation of the device. This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! [. . . ] The manufacturer and/or authorized parties do not accept any claims resulting from damage caused by using the device not according to its intended use. The operator is totally liable for any such damage. In case of visible damage, do not accept or accept the delivery with reservation only. note the extent of damage on the carrier's bill of delivery and notify us of any recorded damage. Hidden damages should be reclaimed immediately after detection, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. Observe the regulations applicable in your country when disposing of the packaging. In case any part is missing, please contact our customer service center immediately. Keep the package closed until installation and under consideration of the positioningand storage markings indicated on the outside. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months), make sure you check the state of the packaging and the parts regularly. The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. â· See that the cable does not touch any heat sources or sharp edges. During operation some parts of the device become very hot. In order to avoid injuries do not touch any hot parts!Do not use the device if it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user, or lead to damage of the device or personal injury, and furthermore invalidate the warranty. Do not lay the cable over carpets or heat insulations. Keep the cable away from operating range and do not dunk it into water. [. . . ] O Make sure the device has been cleaned and dried properly for further usage. O Check the mains lead from time to time to ensure it is not damaged in any way. Never use the device if the lead is damaged. A damaged cable must immediately be replaced by customer service or a qualified electrician to avoid dangers. [. . . ]