User manual BARTSCHER A153.034 DATASHEET

[. . . ] You can install both drivers and use either one depending on your application. However, each driver must be installed individually. Overview Your printer comes with drivers for both Postscript (PS) and PCL emulation. To set up the printer as a PostScript or PCL printer, you must install the PostScript or PCL driver. Note: The MAC Installer will install only the PostScript driver. [. . . ] Oki Data Activating Printer Options If your printer has a duplex unit or second paper tray installed, you must enter the driver and activate them. See "6 Activating Printer Options" on page 5 for instructions on how to do this. NOTE For more information, see the Print Server User's Guide on CD2. 6 Windows® Installation USB Connection Overview Complete these steps to install your printer with a USB connection: 1 Connect the USB Cable 1 Connect the USB cable. 2 Install the printer driver. 3 Install productivity software. 4 Install the on-line user's guide. For connection to a PC running Windows 98 or above 5 Activate printer options. Requires a USB cable version 2. 0 or above. Printer operation is not assured if a USB compatible device is connected concurrently with it. Connect USB cable between the printer and computer. 7 Windows® Installation USB Connection (cont'd) 2 Install the PostScript Printer Driver NOTE The installation procedure may vary slightly depending on the operating system you are using. Drivers are provided for Windows® XP, 2000, Me, and 98. NOTE If New Hardware Found Wizard displays: Win 98: Select "Search for the best driver for your device". Select CD-ROM drive, clear other choices. Win XP and Win Me: Select "Install the software Automatically" or "Automatic Search. . . Click Finish to complete the installation. 1. Make sure the cable is connected to your printer and PC and your printer is turned OFF. Insert CD1 (driver CD) supplied with your printer into your CD-ROM drive. Click the Install User's Guide button. Follow the on-screen instructions. 5 Activate the optional Duplex unit and paper trays If your printer has a duplex unit or optional paper trays, see "6 Activating Printer Options" on page 5 for instruction on how to do this. 9 Windows® Installation Parallel Connection Overview Complete these steps to install your printer with a Parallel connection: 1 Connect the parallel Interface 1 Connect the parallel Interface. 2 Install the printer driver. 3 Install the productivity software. 4 Install the User's Guide. For direct connection to a PC This port requires a bi-directional (IEEE 1284 compliant) parallel cable. Cable must be shielded and UL and CSA approved. Connect a parallel cable between the printer and computer. 5 Activate printer options. 10 Windows® Installation Parallel Connection (cont'd) 2 Install the PostScript Printer Driver NOTE The installation procedure may vary slightly depending on the operating system you are using. Drivers are provided for Windows® XP, 2000, Me, and NT 4. 0. Click Properties General Tab Print Test Page. 17. Click the Print Test Page button. To Install the PCL Printer Driver as Well NOTE If you have installed the PostScript driver, you must reboot your system. Follow the instructions to install the PostScript driver. When you are prompted for the Printer Emulation, select PCL. 1. Make sure the cable is connected to your printer and PC and your printer is turned OFF. Insert CD1 (driver CD) supplied with your printer into your CD-ROM drive. [. . . ] Click on the Print Time Filters triangle. Check Job Accounting, and Job Type. MACscreen7. jpg 7. Click OK. On-Line Manuals For additional information on using printer features as well as printer utilities, see the on-line reference manual. 14 Macintosh® Installation OS X. 1+ to X. 3+ Install the Driver and Utilities NOTE Be sure to switch off antivirus software before installing a printer driver. 1. Place the CD supplied with the printer in the CD-ROM drive. [. . . ]