Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BARTSCHER A153.046. We hope that this BARTSCHER A153.046 user guide will be useful to you.
Lastmanuals help download the user guide BARTSCHER A153.046.
Manual abstract: user guide BARTSCHER A153.046DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] On the back of the finisher/inverter unit, unplug the inverter power cord (1) and the connecting cord (2) to the finisher.
[1] Hole Punch Unit [2] Safety Labels [3] Screw (for securing hole punch unit to finisher: see step 14) [4] Orange Cable (4 leads) [5] Purple Cable (5 leads)
5. Push in on the finisher release lever and slide the finisher away from the inverter.
8. Remove the two screws behind the cover.
b. [. . . ] Remove the two screws behind the cover.
b. Remove the two screws holding the side of the cover in place. Squeeze the white locking tabs on the blue knob and pull it out of the finisher.
c. Remove the screws securing the rear cover (two on the left side [a] and one on the right side [b]), then remove the rear cover.
10. Remove the two screws at either end of the hole punch blank.
a
a
b
11. Swing up the finisher top cover (1) and lift out the punch blank unit (2).
3
12. Remove the top of the blank unit: you need this to install the hole punch unit. Store the bottom of the blank in case you ever remove the hole punch from the finisher.
15. Reattach the cable between the finisher and inverter and the finisher power cable.
29. Test the operation of the hole punch unit: a. With a suitable document open in a software application, select [File] [Print]. Select the appropriate Oki printer, then click [Properties]. Under [Finisher], [Output Bin], select [Finisher(Face-up)] or [Finisher(Face-down)] from the drop-down list. Under [Finisher], [Staple], select [Punch(Long-Edge)] or [Punch(Short-Edge)], then click [OK]. Demonstrate how to empty the punch collection box: a. Push in on the finisher release lever and slide the finisher away from the inverter.
b. [. . . ] Demonstrate how to empty the punch collection box: a. Push in on the finisher release lever and slide the finisher away from the inverter.
b. Remove the punch collection box from the finisher.
c. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BARTSCHER A153.046
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BARTSCHER A153.046 will begin.
