User manual BARTSCHER A153034

[. . . ] Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. [. . . ] • Pressing VOL+/Q+ will raise the volume. Basic Operation Displaying the Black Screen and Turning Off the Sound Temporarily Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound. Note • Pressing AV MUTE again will turn the projected image back on. On-screen display 27 Image Projection (Continued) Resize Mode This function allows you to modify or customize the Resize mode to enhance the input image. Depending on the input signal, you can choose a desired image. Press RESIZE. • See page 43 for setting on menu screen. RESIZE button NORMAL FULL NATIVE 800 × 600 1068 × 800 1024 × 768 1152 × 864 1400 × 1050 1000 × 800 1280 × 720 1280 × 722 1280 × 720 1280 × 768 1280 × 800 — 1280 × 800 1280 × 1024 — 1360 × 768 1366 × 768 — 1280 × 720 — 1280 × 720 16:9 COMPUTER SVGA (800 × 600) 4:3 aspect ratio XGA (1024 × 768) SXGA (1152 × 864) SXGA+ (1400 × 1050) SXGA (1280 × 1024) 1280 × 720 Other aspect ratios 1360 × 768 1366 × 768 1280 × 768 1280 × 800 Input signal Computer Resolution XGA and below *1 *3 Resolution higher than XGA 4:3 aspect ratio Image type NORMAL Output screen image FULL NATIVE 16:9 *1 SXGA (1280 × 1024) 5:4 aspect ratio 1280 × 720 16:9 aspect ratio 1360 × 768 1366 × 768 16:9 aspect ratio *1 1280 × 768 15:9 aspect ratio *1 —*2 —*2 *1 —*2 *1 —*2 1280 × 800 16:10 aspect ratio : Cutout area on which images cannot be projected : Area where the signals are off screen *1 The Image Shift function can be used for these images. *3 In case SXGA+ input. 28 VIDEO/DTV Input signal Video/DTV Image type NORMAL Output screen image AREA ZOOM V-STRETCH 16:9 *1 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM *1 Squeeze *1 Letter box *1 720P, 1035I, 1080I, 1080P 16:9 aspect ratio *1 16:9 aspect ratio —*2 *1 16:9 aspect ratio 540P *1 16:9 aspect ratio (4:3 aspect ratio in 16:9) Basic Operation : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals *1 The Image Shift function can be used for these images. *2 Same as NORMAL mode. About Copyrights • When using the Resize function to select an image size with a different aspect ratio to a TV program or video image, the image will look different from its original appearance. Keep this in mind while choosing an image size. • The use of the Resize or Keystone Correction function to compress or stretch the image for commercial purposes/public displays in a café, hotel, etc. may be an infringement of copyright protected by law for copyright holders. Please use caution. 29 Operating with the Remote Control MAGNIFY buttons FREEZE button PICTURE MODE button AUTO SYNC button BREAK TIMER button SPOT button Adjustment buttons (P/R/O/Q) EFFECT button ECO+QUIET button POINTER button Displaying the Pointer 1 Press POINTER and press P/R/ O/Q on the remote control to move the pointer. • Press EFFECT to change the pointer icon (5 types). Star Finger1 Finger2 Heart Underline 2 Press POINTER again. • The pointer will disappear. Displaying and Setting the Break Timer Using the Spot Function 1 1 Press BREAK TIMER. • The timer starts to count down from 5 minutes. Press SPOT and press P/R/O/Q on the remote control to move the spot area. • Press EFFECT to change the spot area size (3 types). 1/9 1/25 1/8 On-screen display 2 Press P/R/O/Q to adjust the length of the break time. • Increases with P or Q • Shortens with O or R 2 Press SPOT again. • The spot area will disappear. 5 minutes ➞ 6 minutes ➞ 60 minutes 4 minutes ➞ 3 minutes ➞1 minute • The break time can be set in units of one minute (up to 60 minutes). Switching the Eco+Quiet Mode Press ECO+QUIET to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Canceling the break timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute - Input Search Note • Refer to “Eco+Quiet” on page 40 for details. 30 Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Displays the Complete Menu for advanced settings and adjustments. Resize Keystone Eco+Quiet Language Information Go To Complete Menu Note • The setting of Resize mode will be made independently for each Input mode. • The setting of Eco+Quiet mode will be made independently for each Input mode and each Picture mode. Menu Selections (Complete Menu) Example: Adjusting “Bright”. • This operation can also be performed by using the buttons on the projector. 1 2 3 Press MENU. • The “Quick Start Menu” screen is displayed. Example: “Picture” screen menu for COMPUTER (RGB) input Menu item Picture SIG SCR 0 0 0 0 0 1 On Level 2 Off ENTER END PRJ1 PRJ2 Standard Press P or R to select “Go To Complete Menu”. Press Q or O and select “Picture” to adjust. Info • When “PRJ-ADJ2” - “Quick Start Menu” is set to “On”, pressing MENU displays the Quick Start Menu screen. Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColor TM C. M. S. DNR Eco+Quiet Reset SEL. /ADJ. 36 4 Press P or R and select “Bright” to adjust. • The selected item is highlighted. Picture SIG SCR 0 0 0 0 0 1 PRJ1 PRJ2 Standard Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColor TM C. M. S. DNR Eco+Quiet Reset SEL. /ADJ. On Level 2 Off Single ADJ END Items to be adjusted Pict. SIG SCR-ADJ 0 0 PRJ1 PRJ2 To adjust the projected image while watching it Press ENTER. • The selected item (e. g. “Bright”) is displayed by itself at the bottom of the screen. • When pressing P or R, the following item (“Red” after “Bright”) will be displayed. Resize Image Shift Keystone Normal Press ENTER. The item displayed by itself Picture Bright SEL. /ADJ. Menu Note • Press ENTER again to return to the previous screen. END 5 Press O or Q to adjust the item selected. • The adjustment is stored. Picture SIG SCR 0 15 0 0 0 1 PRJ1 PRJ2 Standard 6 Press MENU. • The menu screen will disappear. Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColor TM C. M. S. DNR Eco+Quiet Reset SEL. /ADJ. Useful Features On Level 2 Off Single ADJ END Note • The MENU button is not available while the projector is operating: - Auto Sync/Break Timer/Freeze/AV Mute/Input Search 37 Picture Adjustment (“Picture” Menu) Menu operation n Page 36 Q PAGE1 Picture SIG SCR 0 0 0 0 0 0 0 PRJ1 PRJ2 Standard Q PAGE2 Picture Picture Mode SIG SCR PRJ1 PRJ2 Standard 0 1 On Auto Level 2 Off 1 2 Picture Mode Contrast Bright Color Tint Sharp Red Blue 3 2 4 5 6 7 CLR Temp BrilliantColor TM C. M. S. [. . . ] High intensity lighting can interfere with communication between the 3D LCD shutter glasses and the screen resulting in some flicker. • Check whether two or more projectors are projecting 3D images at the same time. – Use only one projector at a time. 3D images flicker when watching in a room. [. . . ]