User manual BARTSCHER A161.250 SCHEMA

[. . . ] To reduce the risk of fire, explosion, electric shock, or personal injury when using your hob, follow these basic safety precaution. Unplug the power plug from the wall socket. Make sure the machine is grounded to prevent electric shock. Note Important 2_ using this manual A161. 250_XSA_00340A-EN. indd 2 2011-01-19 4:10:04 safety instructions The safety aspects of this appliance comply with all accepted technical and safety standards. [. . . ] Take care not to hurt yourself when cleaning the appliance (external/internal). - You may hurt yourself on the sharp edges of the appliance. Do not clean the appliance with a steam cleaner. - This may result in corrosion. disposal instructions WARNING DISPOSING OF THE PACKAGING MATERIAL All materials used to package the appliance are fully recyclable. Sheet and hard foam parts are appropriately marked. Please dispose of packaging materials and old appliances with due regard to safety and the environment. WARNING PROPER DISPOSAL OF YOUR OLD APPLIANCE WARNING : Before disposing of your old appliance, make it inoperable so that it cannot be a source of danger. To do this, have a qualified technician disconnect the appliance from the mains supply and remove the mains lead. The appliance may not be disposed of in the household rubbish. Information about collection dates and public refuse disposal sites is available from your local refuse department or council. 10_ disposal instructions A161. 250_XSA_00340A-EN. indd 10 2011-01-19 4:10:05 contents INSTALLING THE HOB PARTS AND FEATURES 12 16 19 20 26 28 30 12 12 13 14 16 16 17 17 18 18 18 19 Regulations and compliance Safety instructions for the installer Connecting to the mains power supply Installing into the countertop Cooking zones Control panel Components The key features of your appliance Safety shutoff Residual heat indicator Temperature detection Initial cleaning CONTENTS BEFORE YOU BEGIN HOB USE 20 21 21 22 23 23 24 25 25 Using suitable cookware Using the touch control sensors Switching the appliance on Select cooking zone and heat setting Switching the appliance off Switching a cooking zone off Using the child safety lock Locking and unlocking the control panel Suggested settings for cooking specific foods Hob Hob frame (option) To avoid damaging your appliance FAQs and troubleshooting Service CLEANING AND CARE 26 27 27 28 29 WARRANTY AND SERVICE TECHNICAL DATA 30 30 Technical data Cooking rings Contents _11 A161. 250_XSA_00340A-EN. indd 11 2011-01-19 4:10:05 installing the hob WARNING Be sure the new appliance is installed and grounded only by qualified personnel. The warranty will not cover any damage that may occur as a result of improper installation. Technical data is provided at the end of this manual. REGULATIONS AND COMPLIANCE This appliance meets the following standards: · EN 60335 - 1 and EN 60335 - 2 - 6, relating to the safety of electrical appliances for household use and similar purposes; · EN 60350, or DIN 44546 / 44547 / 44548, relating to the operating features of electric cookers, hobs, ovens, and grills for household use; · EN 55014-1 · EN 55014-2 · EN 61000 - 3 - 2; and · EN 61000 - 3 - 3, relating to basic requirements for electromagnetic compatibility (EMC). INSTALLING THE HOB The connection must be carried out as shown in the diagram. The connecting links should be fitted according to the appropriate connection diagram. The earth lead is connected to terminal. The earth lead must be longer than leads carrying electric current. WARNING The cable connections must be made in accordance with regulations and the terminal screws tightened securely. The connecting cable is to be secured with the mains cable cleat and the covering closed by pressing firmly (locking into place). Before switching on for the first time, any protective foil or stickers must be removed from the ceramic glass surface. WARNING Once the hob is connected to the mains supply, check that all cooking zones are ready for use by briefly switching each on in turn at the maximum setting with suitable cookware. When the hob is powered on for the first time, all displays light and the child safety lock is activated. 220-240V ~ 380-415V ~ 220-240V ~ 220-240V ~ < IN ~ > L: Brown N: Blue PE: Green WARNING Pay attention (conformity) to phase and neutral allocation of house connection and appliance (connection schemes); otherwise, components can be damaged. Warranty does not cover damage resulting from improper installation. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. WARNING installing the hob _13 A161. 250_XSA_00340A-EN. indd 13 2011-01-19 4:10:05 INSTALLING INTO THE COUNTERTOP Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the underside of the appliance. Pay special attention to the minimum space and clearance requirements. Secure the brackets at both sides with the provided screws before mounting the hob onto the brackets. Min. [. . . ] Improperly effected repairs may result in considerable risk to the user. If your appliance needs repair, please contact your customer service centre. What should I do if the cooking zones are not functioning? Check for the following possibilities: · The fuse in the house wiring (fuse box) is intact. If the fuses trip a number of times, call an authorised electrician. · The appliance is properly switched on. [. . . ]