User manual BARTSCHER A162802E-070

[. . . ] 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Displays with an underscan image only when receiving a 720p signal. Displays with the High-Definition image Underscan adjusted optimally. Noise may appear on the edge of the screen with some programmes. Displays an image with the same Dot by Dot number of pixels on the screen when receiving 1080i/1080p signals only. Selecting the WSS picture size automatically Option WSS The “WSS” allows the TV to switch automatically among the different picture size. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “WSS”. Setup Option Option for view 3D setup AQUOS LINK setup Terminal setting NOTE • Use “Wide mode” if an image does not switch to the appropriate picture size. When the broadcast signal contains no “WSS” information, the function will not work even if enabled. • This function is available for 3D images converted from 2D images or normal 2D images. Selecting the WSS picture size manually Option Selecting the picture size manually Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Full”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal range keeping 4:3 or 16:9 aspect ratio. Wide image without side bars. Wide mode You can select the picture size. Selectable picture size varies with the type of signal received. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view” > “Wide mode”. • You can also select an item by pressing f on the remote control unit. − Adjust the headphone volume with the i+/buttons on the TV. − The headphone volume is not muted even by pressing e (Mute) button on the remote control unit. • When not using the headphones: − Audio outputs from the speakers regardless of the settings. Option Option Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Programme title display”. NOTE • This function is available only when the DTV/SAT mode is selected. CAUTION • This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing. Colour system You can change the colour system to one that is compatible with the image on the screen. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Colour system”. Adjusting image position Option Position For adjusting a picture’s horizontal and vertical position. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Position”. Item Centres the image by moving it to the left or right. Centres the image by moving it up or down. NOTE • If you select “Audio out” when a cable is inserted in the HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are muted. • When you select “Audio out”, you can adjust the TV sound volume with the i+/- buttons. Option NOTE Headphone out setting You can select the headphone/speaker audio output when using the headphones. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone out setting”. Headphone Dual Item Audio output from headphones only. [. . . ] For setup details, see the operation manual of your access point. • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. • Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports WEP64, WEP128, TKIP and AES encryptions. • Using a wireless LAN adapter other than the supplied BARTSCHER wireless LAN adapter may result in radio communications that do not comply with regulations on radio communications. [. . . ]