User manual BARTSCHER A181130

[. . . ] 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Panorama picture may appear similar to “Full” depending on broadcast signals. Bars may Cinema 16:9 appear on the top and bottom with some programmes. Bars may Cinema 14:9* appear on the top and bottom with some programmes. * The items will be diplayed in ATV/DTV/SAT mode. Item (for HD [High-Definition] signals) Displays with an overscan image. Displays with an underscan image only when receiving a 720p signal. Displays with the High-Definition image Underscan adjusted optimally. Noise may appear on the edge of the screen with some programmes. Displays an image with the same Dot by Dot number of pixels on the screen when receiving 1080i/1080p signals only. Selecting the WSS picture size automatically Option WSS The “WSS” allows the TV to switch automatically among the different picture size. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “WSS”. Setup Option Option for view 3D setup AQUOS LINK setup Terminal setting NOTE • Use “Wide mode” if an image does not switch to the appropriate picture size. When the broadcast signal contains no “WSS” information, the function will not work even if enabled. 3 Select each character of the new name for the input source with using the software keyboard (Page 13). Video Video+Audio Skipping specified inputs Option Input skip This setting allows you to skip the inputs on the input source selection operation. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input skip”. NOTE • When you select “ATV”, “DTV” or “SAT”, the skip function works only when using the b button on the TV. 41 Useful viewing functions Option NOTE Headphone/Audio out select You can select which device is used for outputting audio. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/ Audio out select”. Headphone Audio out Item Output audio through headphones. Output audio through an A/V receiver or surround audio controller. • This function does not work when “Change audio output device” (Page 30) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”. • Regarding the volume adjustment when “Dual” is set: − Adjust the speaker volume with the i+/- buttons on the remote control unit. − Adjust the headphone volume with the i+/buttons on the TV. − The headphone volume is not muted even by pressing e (Mute) button on the remote control unit. • When not using the headphones: − Audio outputs from the speakers regardless of the settings. Option Option Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Programme title display”. NOTE • This function is available only when the DTV/SAT mode is selected. CAUTION • This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing. Colour system You can change the colour system to one that is compatible with the image on the screen. [. . . ] For setup details, see the operation manual of your access point. • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. • Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports WEP64, WEP128, TKIP and AES encryptions. • Using a wireless LAN adapter other than the supplied BARTSCHER wireless LAN adapter may result in radio communications that do not comply with regulations on radio communications. [. . . ]