User manual BARTSCHER A190043-138

[. . . ] 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] E Erase programme Channels can be erased individually. 1 Press c/d to select “Yes”, and then press ;. 2 Press a/b/c/d to select the channel you want to erase, and then press ;. • A message window pops up. Fine You can adjust the frequency to the desired position. Channels with “Skip” set to “On” are passed over when using :r/s even if selected while watching the image from the TV. 3 Press c/d to select “Yes”, and then press 4 NOTE • Adjust while checking the background picture as a reference. • You can set by directly entering the frequency number of the channel with 0_9 numeric buttons. Lock You can block the viewing of any channel. ; to erase the selected channel. Repeat steps 2 and 3 until all desired channels are erased. EXAMPLE NOTE • 179. 25 MHz: Press 1 > 7 > 9 > 2 > 5. • 49. 25 MHz: Press 4 > 9 > 2 > 5 > ;. Colour sys. Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”). • See “PIN” for setting a PIN. • When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked. • When pressing 6 while “Child lock has been activated” displays, the PIN input window will display. Inputting the correct PIN unlocks the “PIN” temporarily until the power is turned off. 37 Basic adjustment TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”. Item The TV quickly starts up from standby. On Around 15 W or more of power consumption is required during standby. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio languages Each time you press 7 on the remote control unit, the audio language switches. View setting E Set “For hearing impaired” to “Yes” Subtitles for the hearing impaired have priority over each of the subtitle language settings (e. g. , “1st language”, “2nd language”, etc. ). EXAMPLE 1st language (For hearing impaired) 1st language NOTE • Subtitles will not be displayed when the programme does not contain subtitle information. • Subtitles for teletext will not be displayed when an MHP service is active. View setting Subtitle Set up to two preferred subtitle languages (including subtitles for the hearing impaired) to display if subtitles are available. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Subtitle”. Language You can select an OSD language from among 26 languages. Refer to the OSD language column in the specification table for the selectable languages (Page 66). Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Language”. Selectable items E 1st language E 2nd language E For hearing impaired E Switching subtitle languages Each time you press [ on the remote control unit, the subtitle switches. Off 1st language 2nd language 39 Useful viewing functions Optional features settings Go to “HOME” > “TV Menu” > “Setup” > “Option”. Menu CH list :Enter :Back NOTE • Even if you select your desired “Wide mode” manually, the TV may automatically switch to the optimum “Wide mode” depending on the signal received when “WSS” is set to “On”. Item (for SD [Standard-Definition] signals) Keeps the original aspect ratio in a full Normal screen display. A thin side bar appears on each side, and Zoom 14:9* you may also see bars on the top and bottom with some programmes. In this mode, the picture is stretched toward each side of the screen. The Panorama picture may appear similar to “Full” depending on broadcast signals. Bars may Cinema 16:9 appear on the top and bottom with some programmes. [. . . ] BARTSCHER is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own. • VESA screw hole specs (A - B) in millimeters • Standard screw • Quantity I J 600 – 400 M8*2 4 Must be smaller than the shaded area. Use 1. 25 pitch screws. NOTE CAUTION • Install your wall mount on a solid wall perpendicular to the floor. When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury. [. . . ]