User manual BARTSCHER A190102

[. . . ] 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • 49. 25 MHz: Press 4 > 9 > 2 > 5 > ;. Colour sys. Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”). • See “PIN” for setting a PIN. • When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked. • When pressing 6 while “Child lock has been activated” displays, the PIN input window will display. Inputting the correct PIN unlocks the “PIN” temporarily until the power is turned off. 37 Basic adjustment TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”. Item The TV quickly starts up from standby. On Around 15 W or more of power consumption is required during standby. The “Quick start” mode will automatically turn on and off depending on the time shift status. If playable data exists on the Auto (Time shift) USB storage device registered for time shift, “Quick start” will be automatically set to the same status as “On”. Power consumption is small during Off standby. E When selecting “Yes” Register a four-digit number to use the “PIN” function. 1 Press c/d to select “Yes”, and then press ;. 2 Enter the four-digit number as a PIN using 0_9 numeric buttons. Item (for SD [Standard-Definition] signals) Keeps the original aspect ratio in a full Normal screen display. A thin side bar appears on each side, and Zoom 14:9* you may also see bars on the top and bottom with some programmes. In this mode, the picture is stretched toward each side of the screen. The Panorama picture may appear similar to “Full” depending on broadcast signals. Bars may Cinema 16:9 appear on the top and bottom with some programmes. Bars may Cinema 14:9* appear on the top and bottom with some programmes. * The items will be diplayed in ATV/DTV/SAT mode. Item (for HD [High-Definition] signals) Displays with an overscan image. Displays with an underscan image only when receiving a 720p signal. Displays with the High-Definition image Underscan adjusted optimally. Noise may appear on the edge of the screen with some programmes. [. . . ] BARTSCHER is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own. • VESA screw hole specs (A - B) in millimeters • Standard screw • Quantity I J 600 – 400 M8*2 4 Must be smaller than the shaded area. Use 1. 25 pitch screws. NOTE CAUTION • Install your wall mount on a solid wall perpendicular to the floor. When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury. [. . . ]