User manual BARTSCHER A190142

[. . . ] 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • Subtitles may not be displayed properly in 3D mode. View setting Subtitle Set up to two preferred subtitle languages (including subtitles for the hearing impaired) to display if subtitles are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Subtitle”. Language You can select an OSD language from among 24 languages. Refer to the OSD language column in the specification table for the selectable languages (Page 75). Go to “Menu” > “Setup” > “View setting” > “Language”. Selectable items E 1st language E 2nd language E For hearing impaired E Switching subtitle languages Each time you press [ on the remote control unit, the subtitle switches. Off 1st language 2nd language 41 Useful viewing functions Optional features settings Go to “Menu” > “Setup” > “Option”. Menu CH list :Enter :Back NOTE • Even if you select your desired “Wide mode” manually, the TV may automatically switch to the optimum “Wide mode” depending on the signal received when “WSS” is set to “On”. Item (for SD [Standard-Definition] signals) Keeps the original aspect ratio in a full Normal screen display. A thin side bar appears on each side, and Zoom 14:9 you may also see bars on the top and bottom with some programmes. In this mode, the picture is stretched toward each side of the screen. The Panorama picture may appear similar to “Full” depending on broadcast signals. Bars may Cinema 16:9 appear on the top and bottom with some programmes. Bars may Cinema 14:9 appear on the top and bottom with some programmes. Item (for HD [High-Definition] signals) Displays with an overscan image. Audio output from headphones and speakers. Input select For setting the signal type of external equipment. 1 Press b to select the input source for setting the input signal (“EXT1”) from the “INPUT” menu, and then press ;. 2 Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”. EXT1 Item Y/C, CVBS, RGB HDMI auto view This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals. 1 Press b to select the input source (“HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;. 2 Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”. Option NOTE NOTE • If no (colour) image displays, try changing to another signal type. • Check the operation manual of the external equipment for the signal type. Option Headphone/Audio out select You can select which device is used for outputting audio. Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/Audio out select”. Headphone Audio out Item Output audio through headphones. Output audio through an A/V receiver or surround audio controller. Input label You can label each input source with a custom description. 1 Press b to select the desired input source from the “INPUT” menu, and then press ;. 2 Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Select each character of the new name for the input source with using the software keyboard (Page 13). • This function does not work when “Change audio output device” (Page 31) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”. [. . . ] For setup details, see the operation manual of your access point. • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. • Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports WEP64, WEP128, TKIP and AES encryptions. • Using a wireless LAN adapter other than the supplied BARTSCHER wireless LAN adapter may result in radio communications that do not comply with regulations on radio communications. [. . . ]