User manual BARTSCHER IK 35SK DATASHEET

[. . . ] ·Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your appliance. ·Because these following operating instructions cover various models, the characteristics of your refrigerator may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or find help and information online at www. samsung. com. [. . . ] By completing the following steps, your refrigerator should be fully operational. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly. Reset the refrigerator and freezer to the temperatures you want. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufficiently cool. 02 OpERATING Operating your French Door Refrigerator uSING ThE cONTROl pANEl 1 2 3 10 7 9 8 4 5 6 operating _11 DA68-02481C(EN)-0. 0. indd 11 2011. 4. 1 8:44:7 AM (1)Energy Saver Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights. Turn Energy Saver off and the icon goes off. The Energy Saver function automatically turns on when power is supplied to the refrigerator. This mode can not be used with the Water mode simultaneously. (3) larm/ A Hold3 secfor Filter Reset (8)Water Touch this button to dispense water. This mode can not be used with the Ice Type mode simultaneously. Water mode will be off if you Touch the Ice Type button. Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold. To start Cooling Off mode, touch and hold the Energy Saver button and the Power Freeze button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF. To cancel Cooling Off mode, touch and hold the Energy Saver and the Power Freeze buttons again for 5 seconds. CoolingOff Mode (4) ighting/ L Hold3 secfor CF Touching this button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature units between °C and °F 12_ operating DA68-02481C(EN)-0. 0. indd 12 2011. 4. 1 8:44:10 AM (9)IceOff If you don't want to make more ice, touch this button. The icon will light up and the Ice-Maker stops making ice. We recommend you stop ice making if the following occur: - There is enough ice in the ice bucket. [. . . ] Did you manually stop the ice making function?Try setting the freezer temperature lower. The cabinet-door sealing area of the appliance is hot and condensation is occurring. You can hear water bubbling in the refrigerator. There is a bad smell in the refrigerator. [. . . ]