User manual BAUKNECHT BCVM 8100 PT

[. . . ] This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. [. . . ] Confirm by pressing the button : the settings appear on the display. If the proposed temperature is that desired, turn the "Browse" knob to position the cursor at "Start", then Sound when the oven has reached the set temperature. At the end of preheating, the oven automatically The food can now be placed in the oven for cooking. To set a different cooking function, turn the "Functions" knob and select the required function. This function can be used to cook food for a set length of time, from a minimum of 1 minute to the Maximum time allowed by the selected function, after which the oven switches off automatically. To select the function, turn the "Browse" knob to position the cursor at "cooking duration". Press the button to select the parameter; "00:00" flashes on the display. Modify the value by turning the "Browse" knob to display the desired cooking time. Confirm the selected value by pressing the button . At the end of cooking, with certain functions, the display indicates the possibility of browning the surface of your dish. This function can only be used when a cooking duration has been set. Cooking finished at 20:00 ^ to prolong, OK to brown At the end of cooking time, the display shows "^ to prolong, OK to brown". Press the button oven starts a 5 minute browning cycle. This function can only be carried out once. The desired cooking end time can be set, delaying oven switch-on by up to a maximum of 23 hours and 59 minutes, starting from the current time. This is possible only after a cooking duration has been set. This setting is available only if preheating is not required for the selected function. After setting the cooking duration, the display shows the cooking end time (for example 19:20). Turn the "Browse" knob to position the cursor at the cooking end time. Press the button to select the parameter: the cooking end time flashes. To delay the cooking end time, turn the "Browse" knob to the desired value. Confirm the selected value by pressing the button . [. . . ] - To check if a raising cake is baked, insert a toothpick into the top of the cake. If the toothpick comes out dry, the cake is ready. - When using non-stick cake tins, do not butter the edges, as the cake may not rise evenly at the edges. - If the cake "sinks" during baking, set a lower temperature the next time, even reducing the amount of liquid and mixing more gently. [. . . ]