User manual BAUKNECHT UXT5436ADS

[. . . ] NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers. When frying, oil in the pan can easily overheat and catch fire. The risk of self combustion is higher when the oil has been used several times. Keep unit clean and free of grease and residue build-up at all times to prevent possible fires. [. . . ] Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/scouring pads which will scratch and damage surface. for heavier soil use a liquid degreasing cleaner. After cleaning, you may use non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain. Do not use any product containing chlorine bleach. Residue and grease from cooking will collect in the residue cup located inside the range hood, behind the perforated diffuser panels. Dry residue cup and re-install before using hood. Models UXT5430AD* & UXT5436AD* hoods are designed with a self cleaning feature. the centrifugal blower system automatically liquefies cooking residue accumulated in its internal housing , and deposits the residue in the cleaning cup. Nevertheless, grease from cooking can also dry and adhere in the internal housing. Running the self clean function periodically will flush out accumulated residue in the range hood's internal housing. Cleaning Frequency: Cleaning should be completed approximately once a month under normal use. detergent: Non-corrosive , non-abrasive grease cutting spray detergents are recommended. Self Clean: Turn blower on lowest speed for cleaning. set Timed Delay Off to 5 minutes as indicated. With nozzle on `spray', squirt the grease cutting detergent through the safety grill directly onto blower blades 10-15 times. Allow self cleaning to complete for 5 minutes. Clean with mild detergent or in dishwasher under normal wash cycle. (If desired, repeat above steps with water to rinse out detergent) DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns. Make sure all power is turned off and bulbs are cool. [. . . ] ⷠBe sure to retain proof of purchase to verify warranty status. If the dealer or service company cannot resolve the problem, write to Maytag ServicesSM, Attn:CAIR® Center, P. Box 2370, Cleveland, TN 37320-2370, or call 1-800-688-9900 USA or 1-800-688-2002 CANADA. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080. [. . . ]