User manual BAUKNECHT WGD9470W DIMENSIONS

[. . . ] Duet Steam and Non-Steam Electronic Gas Dryer PRODUCT MODEL NUMBERS WGD9450W, WGD9470W, WGD9550W, WGD9600T, WGD9750W Gas supply: This dryer is equipped for use with Natural gas. When rigid pipe is used it should be 1/2" IPS. [. . . ] 4" (102 mm) diameter vent is required. Rigid or flexible metal exhaust vent must be used. Exhaust hood must be at least 12" (305 mm) from the ground or any object that may be in the path of the exhaust. Dryer dimensions OVERALL DIMENSIONS STEAM - 529/16" Custom undercounter installation-dryer only (1335 mm) NON-STEAM - 511/2" (1308 mm) 38" (965 mm) 1"* 27" 1"* (25 mm) (686 mm) (25 mm) Most installations require a minimum 5" (127 mm) clearance behind the dryer for the exhaust vent with elbow. See Installation Instructions, "Venting Requirements. " 38" (965 mm) *STEAM - 329/16" (827 mm) NON-STEAM - 311/2" (800 mm) 27" (686 mm) For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent air ventilation openings are acceptable. 6" (152 mm) 3" (76 mm) 48 in. 2 * (310 cm2) 14" max. (457 mm) 76" (1930 mm) B A 4" (102 mm) 4" (102 mm) 4" (102 mm) C 24 in. 2 * (155 cm2) 2½" (64 mm) 3" (76 mm) STEAM - 51/2"** STEAM - 329/16" (140 mm) (827 mm) NON-STEAM - 311/2" NON-STEAM - 5"** (127 mm) (800 mm) 1" (25 mm) 1" 27" (686 mm) (25 mm) A. Angled hood (acceptable) The vent system chart provides venting requirments that will help to achieve the best drying performance. Vent system chart: NOTE: Side and bottom exhaust installations have a 90° turn inside the dryer. To determine maximum exhaust length, add one 90° turn to the chart. Number of o 90 turns or elbows 0 1 2 3 4 Type of vent Rigid metal Rigid metal Rigid metal Rigid metal Rigid metal Box or Louvered hoods 64 ft (20 m) 54 ft (16. 5 m) 44 ft (13. 4 m) 35 ft (10. 7 m) 27 ft (8. 2 m) Angled hoods 58 ft (17. 7 m) 48 ft (14. 6 m) 38 ft (11. 6 m) 29 ft (8. 8 m) 21 ft (6. 4 m) For dryer on pedestal; cabinet installation, with a door, the minimum ventilation openings in the top are required. 7"* 7"* (178 mm) (178 mm) 14"* max. [. . . ] Specifications subject to change without notice. W10255469B 11/2010 Back View Side View 75/8" (194 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. [. . . ]