User manual BAZOO MEDIABOARD QUICK INSTALLATION GUIDE

[. . . ] It will help you to understand and master the different functions. Instead of the customary ball your mouse has a newly-developed optical laser sensor. This is in the position to guarantee precise scanning and cursor control on almost all surfaces. [. . . ] This is in the position to guarantee precise scanning and cursor control on almost all surfaces. The special surface of the mouse ensures pleasant and safe working even over longer periods of time. Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness or weakness in these areas, see a qualified health professional. To reduce the risk of injury, follow these precautions: · Take frequent breaks, get up and walk around several times every hour. Keep your shoulders relaxed with your elbows at your side. ⷠPosition your keyboard and mouse so that you do not have to stretch. Note that pressing these programmed buttons when using many software programs (e. Select the button of your choice, and in the drop-down menu, check off the function wanted. - Normal Function: standard function of the respective button - Assign to Keep Shooting: permanent shooting function - Button Disabled: deactivate the button - Assign to Keyboard: using the keyboard enter up to 3 letters, which can be activated with one key stroke (successively); if you mistype, you can delete the entry by pressing "C". Setting the Resolution Depending on application or playing situation the resolution of the laser sensor can be set using both buttons "6" and "7" (see Diagram 1) in four steps (Standard: 400 / 800 / 1. Now select the "DPI/CPI Configure" tab; the following window appears: First select the matching mouse from the , , Select Mouse" drop-down menu. Then click on the corresponding step and check the matching tick. Push the controller to the desired value and click on the "Apply" button to set the new step. [. . . ] Then click on the corresponding step and check the matching tick. Push the controller to the desired value and click on the "Apply" button to set the new step. You will be guided automatically through the uninstallation process. [. . . ]