User manual BEABA BIB' EXPRESSO

[. . . ] €  ever fill the heating unit above the upper limit. If the unit is too full, boiling N water may spill out.  o not lift the lid when a cleaning or heating cycle is D in process. € t is recommended not to heat food for too long a period. [. . . ] € n Bain-Marie mode, the product may be used with or without the base. I T •  o remove the heating unit from the base, remove the steriliser/bottle compartment. €  emove the power cable from the cable storage compartment and turn R the heating unit’s unlocking button clockwise. €  ress down on the unlocking button and lift the heating unit from front to P back. €  or hygiene reasons, and in order to avoid any microbiological risks, the F bottle should be consumed quickly after preparation (within 2 hours). Before preparing any food, please consult a health professional or your paediatrician for further information about food safety and preparation (water to use, storage, preparation methods, etc. Please also refer to the instructions provided with your milk or baby food jars for any specific recommendations. Never use water which has been used for a bain marie to prepare feeding bottles. CLEAN MODE •  or hygiene reasons, the device is fitted with a self-cleaning function which F sterilises the device automatically. € Pour about 100 ml of water into the heating unit. 13 •  t the end of the self-cleaning cycle, the button A switches off and the device beeps three times. €  ait a few minutes for the device to cool in order to avoid the risk of burns. W •  mpty the contents of the heating unit into a suitable receptacle using the E water distribution button. €  pen the lid and clean the interior of the heating unit with a clean and dry O cloth. €  ever touch the recipient directly after the water for a cleaning cycle has N been distributed. It may be very hot because the water for the clean mode may reach 100°C. Never use water which has been used for the clean mode to prepare feeding bottles.  ever open the heating lid unit during a self-cleaning N cycle. Always wait 5 minutes after a self-cleaning cycle before starting a new cycle. STERILISER/BOTTLE COMPARTMENT • Clean the bottles with hot soapy water and rinse well before sterilising. €  o sterilise your bottles in the microwave, place the bottles and the T accessories in the steriliser/bottle compartment. It is able to hold up to 3 bottles depending on model and size. [. . . ] €  pparatet er som regel varmt, og derfor skal du udvise ekstra agtpågivenhed A for at undgå enhver risiko for forbrænding. €  f hygiejniske grunde og for at undgå enhver form for mikrobiologisk risiko A skal sutteflaskeindeholdet indtages hurtigt efter tilberedning (inden for 2 timer). €  jern derefter sutteflasken eller babymaden med en klud for at undgå F enhver risiko for forbrænding. 70 71 •  fter at have rørt rundt i indholdet af babymaden på glas eller efter at have E rystet sutteflasken, skal du altid kontrollere, at madtemperaturen ikke er for høj, og at der ikke er nogen risiko for at dit barn brænder sig. [. . . ]