Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEABA UP & DOWN. We hope that this BEABA UP & DOWN user guide will be useful to you.
Lastmanuals help download the user guide BEABA UP & DOWN.
Detailed instructions for use are in the User's Guide.
[. . . ] ⢠This bouncer does not replace a Moses basket or a cot. When baby needs to sleep, place him or her in a suitable Moses basket or cot. ¢ It is dangerous to place this bouncer on an elevated surface: a table for example. ⢠Always use the restraint system. [. . . ] ¢ The cover must be hand washed and left to dry flat. the newborn pillow is machine washable at 30°. Place the small tubes (B) on the frame (F). In order to avoid assembling the product incorrectly, always ensure that the polarising slots are aligned correctly. Always ensure that the knuckle is placed in the same direction as the tube and that the nut hole on the knuckle is facing towards the inside of the bouncer. Fasten the knuckles (C) and the small tubes (B) to the frame with the screws (D). Place the nut in the hole designed for this purpose. Fasten the nut and screw in place with the assembly key (J). Before using, always ensure that the screws are tightened properly. 3
5
Position the large tubes (A) by pressing on the spring buttons and inserting them in the small tubes (B). The three holes on the large tube must be facing towards the inside of the bouncer. Press on the locking buttons on each side of the seat structure and release at the desired position. 4
6
Remove the handles (E) by pressing on the spring button and unfold the seat structure (G) following the instructions for setting the incline. Place the seat structure (G) on the tubes. Always ensure that the seat structure is facing the right way (seat on the same side as the stabiliser). Position the handles (E) by pressing down on the spring buttons and inserting them in the large tubes (A). Place the cover (H) on the seat structure (G). To do this, fold the seat structure, place over the back and then over the seat. ASSEMBLY INSTRUCTIONS FOR LOW POSITION
INSTRUCTIONS FOR SETTING THE INCLINE AND FOLDING
To use your bouncer in the low position, follow the assembly instructions above without inserting the large tubes (A). Then fasten the handles (E) to the small tubes (B). [. . . ] To insert the newborn pillow, remove the fabric protections from the harness straps. Pass the two straps on the harness through the two openings on the newborn pillow. Replace the fabric protections and close the harness strap clips. To install the child in the bouncer, unlock the 4 fastening points on the restraint system. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEABA UP & DOWN
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEABA UP & DOWN will begin.
