User manual BECKER TRAFFIC ASSIST 7928

[. . . ] Instructions for Use >>> > EN SAFETY MESSAGE HIERARCHY This manual uses the following types of safety messages to draw your attention to important safety and other information for use of the Traffic Assist. Safety message hierarchy Please review the symbols and content of the boxes below. The information in the DANGER, WARNING, CAUTION and NOTICE boxes describes the potential consequence associated with disregarding the messages throughout the manual. The information in the NOTE boxes relates to use of the Traffic Assist. DANGER The warnings contain safety information regarding hazardous situations, which if not avoided, will result in death or serious injury. CAUTION These warnings contain safety information regarding hazardous situations which, if not avoided, could result in minor or moderate injury. NOTICE These warnings contain information regarding items or situations which may cause damage to the unit or vehicle if disregarded, information regarding unit warranties and/or information pertinent to traffic laws. [. . . ] > Press the key again to start navigation. Note: If no GPS signal is available, route guidance is started automatically as soon as a signal is received. Once the calculation is complete, the total distance from the first to the last points on the route and the probable length of the journey for this route are displayed in the Route planning window under the list of route points. >>> > EN Navigation menu: Enter coordinates You can also enter a destination via geographic coordinates. > Press Enter coordinates navigation menu. in the 55 >>> > EN NAVIGATIONAL MODE Navigation menu: Settings The settings of relevance to the navigation functions can be found in the Settings menu. Note: All settings must be confirmed by pressing the OK key. You can exit the current settings button at any time without saving any changes by pressing the key . The functions of the various keys are explained below. Structure Various buttons are available in the setting menu: > Select the value you wish to change. > Then enter the desired values using the to buttons. > You can set the direction of the longitude and latitude via LON and LAT using the right-hand buttons in the row. Note: The coordinates entered must correspond to WGS84 (World Geodetic System 1984). > Press the Start button to start route guidance to the entered coordinates. > Scroll to the menu item Settings in the navigation menu using the button and then press it. This takes you to the setting menu. 56 NAVIGATIONAL MODE The Routing options key You can set your drive profile in the Routing options settings window. The settings made here have an effect on the route selection and on the calculation of the estimated journey times. > Press Routing options in the settings menu. Setting optimum >>> > EN fast The Routing options settings menu appears. short scenic Meaning With this option, the optimum route in terms of travel time and mileage is calculated. With this option, the shortest route possible for the time required is calculated. With this option, the shortest route is calculated in terms of miles traveled. With this option, the most winding route is calculated. Meaning With this option, the corresponding road type is included in the route calculation. Avoid With this option, wherever possible, the corresponding road type is avoided. Not permitted With this option, the corresponding road type is not included in the route calculation. > Confirm your selection by pressing the OK key. Setting Allowed With the buttons next to the fields Motorways, Ferries and Toll roads, , you can set > Select the mode of travel by repeatedly pressing the Profile field. > Select one of the following options by pressing the field on the right next to the Routing type display. [. . . ] without the danger of scratching the screen). The stylus is more accurate than operation using the fingers, since only the thin tip touches the screen. In addition, dirty marks on the screen caused by finger prints are avoided. USB (Universal Serial Bus) The Universal Serial Bus (USB) is a bus sytem for interconnection of a computer with external USB peripherals for the exchange of data. >>> > EN 101 Keywords >>> > EN KEYWORDS A Active Sync . [. . . ]