User manual BECKER TRIVISION7972 OPERATION GUIDE

[. . . ] Information regarding general road safety. 89 Detailed information on a programme . 98 Tuning into a programme from the EPG. 78 Entering the code number/Initial operation . [. . . ] · . CPIWCIG You can set the user language via the . CPIWCIG menu item. · 2TQITCOOG OGOQT[ You can assign stations from the station list to a preset and delete the preset again via the 2TQITCOOG OGOQ T[ menu item. · %JKNF NQEM You can set the child lock under the %JKNF NQEM menu item. · 4GEGRVKQP 5GVVKPIU You can display and modify the general settings such as the reception modes or language settings via the 4GEGR VKQP 5GVVKPIU menu item. · 5GVVKPIU You can display and modify the general settings, such as the display brightness via the 5GVVKPIU menu item. All the settings can also be reset to the factory settings here. Sound settings Open the Setup menu. Select the #WFKQ menu item by pressing and . X Press . X X 103 Setup Setting sound selection Select the 5QWPF UGN menu item in the Audio Menu by pressing and . X Select between /QPQ, 5VGTGQ, 5QWPF EJ # and 5QWPF EJ $ by pressing or . X Select between /QPQ, 5VGTGQ, 5QWPF EJ # and 5QWPF EJ $ by pressing or . Notes: If the option "5VGTGQ" is selected, the current programme is output in stereo quality, provided it is being transmitted in stereo quality by the television station. If one or several sound types are greyed out in the list, these are not currently available. The available sound types depend on the current reception settings as well as the programme being transmitted. The Audio menu is displayed. By pressing and , you can now select between the entries 5QWPF UGN, 6TGDNG, $CUU, . QWFPGUU, (NCV and $CNCPEG. The selection is confirmed by pressing . Or: X Press . The Sound selection menu appears. 104 Setup Setting treble/bass X Switching loudness on/off With loudness, the sound is improved by increasing the bass (especially suitable for low-volume settings). Select the . QWFPGUU menu item in the Audio Menu by pressing and . X Select between 1P and 1HH by pressing or . X Select the 6TGDNG or $CUU menu item in the Audio menu by pressing and . Select the 5WTTQWPF 5QWPF menu item in the Audio Menu by pressing and . X Select between 1P and 1HH by pressing or . X The set values are stored automatically when the Audio menu is exited. Switching the flat function on/of With this function, you can set the sound settings to a medium value. Select the (NCV menu item in the Audio Menu by pressing and . X Select between 1P and 1HH by pressing or . X The set values are stored automatically when the Audio menu is exited. X Set the desired treble and bass values by pressing or . The set values are stored automatically when the Audio menu is exited. Switching Virtual Dolby® Surround* on/off With this function, you can switch the virtual surround sound on or off. *. Manufactured under licence from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 105 Setup The set values are stored automatically when the Audio menu is exited. Note When 1P is selected, the treble and bass settings are adjusted to a medium value. If 1HH is subsequently selected again, the previous values for treble and bass are set again. Video settings In the video settings, you can adjust settings such as brightness, contrast and picture format. Note The video settings can only be adjusted when TV mode or the optional DVD mode is activated. Select the 8KFGQ menu item by pressing and . [. . . ] S-Video (also known as Y/C) is a base band analogue video format. It offers a higher-quality signal than CVBS. S-Video is normally used in home DVD players, video recorders and modern games consoles. It is also used in some professional technologies such as computer video cards. [. . . ]