Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEGLEC ANTARI Z-300 FAZER. We hope that this BEGLEC ANTARI Z-300 FAZER user guide will be useful to you.
Lastmanuals help download the user guide BEGLEC ANTARI Z-300 FAZER.
Manual abstract: user guide BEGLEC ANTARI Z-300 FAZER
Detailed instructions for use are in the User's Guide.
[. . . ] Refer to your ANTARI dealer or other qualified service personnel. Fazer must be installed out of the reach of children. Never leave the unit running unattended. Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fazer Always make sure there is sufficient liquid in the Fazer liquid tank. [. . . ] When the container is full, place the cap back on the liquid tank and tighten. Your Fazer can only be operated by connecting the Z-6 remote control into the remote control slot in the back of the machine. Operation Plug the remote control cord into the slot marked remote control on the back of the Fazer machine. Plug the power cord into a grounded electrical outlet. Turn on the power switch located on the back of the Fazer machine. The red light on the remote control will turn on once the machine is plugged into a power outlet and the on/off switch is turned on. Once the red light comes on the machine must warm-up. This period varies depending on conditions but should not take more than 10 minutes under any circumstances. The green light on the remote control will turn on once the machine is ready to produce haze. When the green light turns on, the machine may be operated using the remote control. Prior to the green light turning on the machine will not haze and the functions will not respond. The Z-300 is equipped with a low fluid sensor. When the fluid is not low the light on the back of the machine is green and will flash on and off continuously. When the fluid is low the light will turn red. When the light is red add fluid to the Fazer immediately. When the Fazer does not have any liquid in the machine the PC board will shut off the pump so that the machine will not be damaged. Even with the low level sensor, the Z-300 Fazer machine can suffer damage when run without fluid. If the machine does not function after having been run without fluid please contact your Antari dealer for service. [. . . ] When released, the manual function stops and the machine will return to the previous setting; timer; continuous; or stationary. Therefore, if both buttons have When depressed and held down the Fazer will haze at maximum volume for as long as the button is held down, regardless of the machine's setting at the time. Use only ANTARI fog liquids or other dealer recommended fog fluids. Failure to use high quality fog liquid can damage the machine. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC ANTARI Z-300 FAZER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC ANTARI Z-300 FAZER will begin.
