User manual BEGLEC BEAT 6 MK2 V 1.2

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. CAUTION: To reduce the risk of electric shock, do not remove the top cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] Be sure to turn off the mixer before you make changes to the different connections. In this manual we talk about "line inputs". This is a global name for inputs with a level between 750mV and 2V. Accepts either a balanced microphone with an XLR connector or an unbalanced microphone with 1/4" mono jack. This input is mainly used as DJ-microphone. The talk over does not affect the signal level of this input. Use this control to adjust the level of the DJ microphone on the VU-meter at about 0dB. PANPOT CONTROL: Used to place the sound from the DJ micro somewhere in the stereo field. A panpot control does the same for mono signals as a balance control does for stereo signals. TALKOVER: Use the switch to automatically mute the input channels 1 to 5 while you are talking through the DJ microphone. you can adjust the amount of muting on input channels 1 to 5. The more you turn the talkover level to the right, the more these channels are muted while talking through the DJ Micro(1). Pressing multiple Cue-buttons makes it possible to derive a mixed sound from the selected sources. CHANNEL FADER: Used to set the level of each channel separately. CHANNEL VU METER: Each channel has its own LED VU-meter so you can adjust the gain level (11) very quickly. Make sure the levels do not exceed 0dB (or 100%). The audio risks to be distorted when the signal level comes in the red zone of the VUmeter. INPUT SOURCE SELECTOR: Used to select the correct input on each channel: Phono, line, aux or mic. On some channels there are additional input selectors on the back. Are different names for inputs with almost the same signal levels. GAIN LEVEL: Adjusts the input level on each channel. Use this control to adjust the level on the VU-meter at about 0dB. [. . . ] INPUT CHANNEL 5: used to connect two different line level audio signals. The input source selector (10) on the front determines which input will be active. INPUT CHANNEL 4: used to connect a turntable and/or a line level audio signal. The input source selector (10) on the front determines which input will be active. [. . . ]