User manual BEGLEC BT-54L3 V1.0

[. . . ] 2. 5--SETTING UP (DMX512 CONTROLLER). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. PART 3 DISPLAY PANEL OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. 3. 1--BASIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. 3. 2--MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 5. 2--MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21. 1 1. 1 PRODUCT (GENERAL) PRODUCT INTRODUCTION This product is designed for indoor use only. Suitable applications include wash or effect lighting for architectural, stage or nightclub applications. Direct input of DMX512 signal allows the fixtures to be controlled from any DMX512 controller. The fixture is fully programmable with one custom program available and is supplied with two automatic programs (all accessible from DMX512 controller). This product can be operated as a single unit or with multiple units for large applications. 1. 2 PRODUCT FEATURES RGBW Dimmer 0-100% Strobe Automatic programs Custom program (programmable) Auto-color sequence (variable speed) LCD display Fan speed control DirectDMX512 input No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ITEM Head Side arm Handle Menu Enter Down Up Switch Power input DMX 5-PIN signal input DMX 3-PIN signal input DMX 3-PIN signal output DMX 5-PIN signal output Safety lock 1 PRODUCT(GENERAL) 1 2008. 7. 31 1. 3 TECHNICAL SPECIFICATIONS Voltage Rated Power LED/Unit 100~240V. . . 50/60Hz 280W 54pcs (14 X 2W RED / 14 X 3W GREEN / 14 X 3W BLUE/12 X 3W WHITE) Cooling Dimensions Weight Forced air convection 390 x 320 x 385mm 16Kg 1 PRODUCT(GENERAL) 2 2008. 7. 31 1. 4 PHOTOMETRIC DATA WHITE 6300 1550 694 404 277 LUX 3 2 1 0 1 2 3 2 4 6 8 10Distance(m) RED 5140 1373 620 350 238 LUX 3 2 1 0 1 2 3 2 4 6 8 10Distance(m) GREEN 9360 2320 1055 602 398 LUX 3 2 1 0 1 2 3 2 4 6 8 10Distance(m) BLUE 1710 420 192 110 73 LUX 3 2 1 0 1 2 3 2 4 6 8 10Distance(m) RGB 16050 3920 1765 1010 670 LUX 3 2 1 0 1 2 3 2 4 6 8 10Distance(m) RGB+WHITE 20200 5400 2430 1400 950 LUX 3 2 1 0 1 2 3 2 4 6 8 10Distance(m) 1 PRODUCT(GENERAL) 15 15 15 15 15 15 3 2008. 7. 31 1. 5 SAFETY WARNING IMPORTANT ALWAYS READ THE USER MANUAL BEFORE OPERATION. PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA. This product must be installed by a qualified professional. Always operate the equipment as described in the user manual. A minimum distance of 0. 5m must be maintained between the equipment and combustible surface. The product must always be placed in a well ventilated area. Always make sure that the equipment is installed securely. DO NOT stand close to the equipment and stare directly into the LED light source. Always disconnect the power supply before attempting and maintenance. Always make sure that the supporting structure is solid and can support the combined weight of the products. The earth wire must always be connected to the ground. Do not touch the power cables if your hands are wet. ATTENTION This product left the place of manufacture in perfect condition. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual. Avoid shaking or strong impacts to any part of the equipment. Make sure that all parts of the equipment are kept clean and free of dust. Always make sure that the power connections are connected correct and secure. If there is any malfunction of the equipment, contact your distributor immediately. When transferring the product, it is advisable to use the original packaging in which the product left the factory. [. . . ] Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then proceed to connect from the output as stated above to the input of the following fixture and so on. Note: if user want to circulate the created steps, please set the last step 5. 11 time as 0 For example, there are 3 steps, the Ste p 1 5. 11 time Ste p 2 5. 11 time Ste p 3 5. 11 time setting should be like belowed: =4 5. 12 Use = Yes =5 5. 12 Use = Yes =0 5. 12 Use = Yes s 3. 8 EXTRA MENU 6 Extra 6. 1User-key 6. 2password 0000 1111 6. 1User-key When the user inputs 6. 1User-key , the hidden menu 7 Cablid , 8 CodeChange , 9 default will appear on display panel, and the user is able to reset the DEFAULT values of all functions. 8 codechange , the default access code is 6. 2password When the user inputs the 6. 2password , the user is able to reset the DEFAULT values and get the administrator rights The password can be changed at 8 CodeChange , the default access code is 1111 3 DISPLAY PANEL OPERATION 13 2008. 7. 31 3. 9 CALIB MENU 7 Calib 7. 1 W1:3200K 7. 1 RED 7. 1 GREEN 7. 1 BLUE 7. 2 RED 7. 2 GREEN 7. 2 BLUE 7. 3 RED 7. 3 GREEN 7. 3 BLUE 7. 4 RED 7. 4 GREEN 7. 4 BLUE 7. 5 RED 7. 5 GREEN 7. 5 BLUE 7. 6 RED 7. 6 GREEN 7. 6 BLUE 7. 7 RED 7. 7 GREEN 7. 7 BLUE 7. 8 RED 7. 8 GREEN 7. 8 BLUE 7. 9 RED 7. 9 GREEN 7. 9 BLUE 7. 10 RED 7. 10 GREEN 7. 10 BLUE 7. 11 RED 7. 11 GREEN 7. 11 BLUE 7. 12 RED 7. 12 GREEN 7. 12 BLUE (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) (000~255) 7. 2 W2:3400K 7. 3 W3:4200K 7. 4 W4:4900K 7. 5 W5:5600K 7. 6 W6:5900K 7. 7 W7:6500K 7. 8 W8:7200K 7. 9 W9:8000K 7. 10 W10:8500K 7. 11 W11:10000K 7. 12 RGB W 7 Calib Enter the 7 Calib to select white color of different color temperature. [. . . ]