User manual BEGLEC BT-700S V1.0

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Thank you for buying this BriteQ product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. [. . . ] remove the gobo and insert the new gobo. Press the fixation-ring together and insert it in the front of the gobo. To go back to the functions without any change press the ESC button. Channel Mode Used to set the DMX working mode to 16 or 22 channels Press the ESC button and turn the jog wheel until Channel Mode is shown on the display. Once the mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. standby mode Used to place the unit in standby mode. Press the ESC button and turn the jog wheel until StandBy Mode is shown on the display. Once the mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. Show Mode Used to choose the Show mode when used in standalone or master/slave mode. Press the ESC button and turn the jog wheel until Show Mode is shown on the display. Once the show mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. Slave Mode Used to make the slave unit work in opposite to the master or to work in complete sync. Press the ESC button and turn the jog wheel until Slave Mode is shown on the display. Once the mode is selected, press the ENTER button to confirm your choice. ( or automatically return to the main functions without any change after 30 seconds. ) To go back to the functions without any change press the ESC button. [. . . ] SLAVES have 2 working options: The other units are set to slave mode (slave-LED is constantly on). In order to create a great light show you can introduce contrast movements (pan/tilt of slave is inversed) In the menu of the slave units you can go to option Slave Mode and select: o Slave Mode 1 slave works in sync with the master. O Slave Mode 2 slave works opposite from the master. BY EASY CONTROLLER: When used in Master/slave mode we strongly advice you to use the CA-8 "Easy controller" Just connect this small controller to the 1/4" jack of the master unit, and you will be able to control the following Power Supply: Sound Control: Pan/Tilt: Beam angle: DMX connections: Lamp: Size: Weight: AC 230V, 50/60Hz Internal microphone 540° / 270° with automatic correction 15° 3pin XLR male / female HTI700W D4-75 674 x 471 x 406mm 32, 6 kg Dimmer First set Master unit, then set Slave units' position Position/ Latch (LED fast blinking) Sound 1 (LED off ) Sound 2 (LED slow blinking) Don't forget to select "On" for the "Lamp On/Power On" function in the main menu, otherwise you will only see the movements with the lamp off ! [. . . ]