User manual BEGLEC BTX 300 BEAM V1.0

[. . . ] DANGER ~ GEVAAR ~ GEFAHR ~ PELIGRO ~ PERIGO ! WARNING: DANGER!never expose the lens to direct sunlight, even for a short period. This may damage the light effect or even cause fire!n'exposez jamais la lentille directement aux rayons de soleil, même pendant un bref instant. [. . . ] Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. DMX Functions Enter menu mode, select DMX Functions, press ENTER button to confirm, use UP and DOWN button to select DMX Address, DMX Channel Mode, View DMX Value or WDMX Setting. DMX Address--DMX512 address setting Select DMX Address, press ENTER button to confirm, the present address will blink on the display, use UP and DOWN button to adjust the address from 0 to 512, press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. DMX Channel Mode--channel mode Select DMX Channel Mode, press ENTER button to confirm, present channel mode will blink on the display, use UP and DOWN button to select Mode1 (18 channels mode) or Mode 2 (18 channels mode) or Mode 3 (25 channels mode), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. View DMX Value Select View DMX Value, press ENTER button to confirm. Channel function and its value will show on the display, use UP and DOWN button to view other DMX value. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. Fixture Setting Enter menu mode, select Fixture Setting, press ENTER button to confirm, use UP and DOWN button to select Pan Inverse, Tile Inverse, BL. O. Pan Inverse Select Pan Inverse, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal) or Yes (pan inverse), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. Tilt Inverse Select Tilt Inverse, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal) or Yes (tilt inverse), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. P/T Moving--Blackout while pan/tilt moving Select BL. O. P/T Moving, Press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal while pan/tilt moving) or Yes (blackout while pan/tilt moving), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. BRITEQ® 11 BTX-300BEAM BRITEQ® 12 BTX-300BEAM BL. O. Color Change--Blackout while change color Select BL. O. Color Change, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal while change color) or Yes (blackout while change color), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. Gobo Change--Blackout while change gobo Select BL. O. Gobo Change, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal while changing gobo) or Yes (blackout while changing gobo), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. button back to the last menu or let the unit idle one minute to exit menu mode (If the lamp is off via DMX signal, you can reconnect the DMX controller to make the lamp on). Off If DMX Off-- Lamp turns off when DMX signal is cut off Select Off If Dmx Off, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select Yes (Lamp turns off when DMX signal is cut off), press ENTER button to store. [. . . ] Measure the mains voltage on the main connector. Check the power on LED to see if it can be light up or not. If not, check DMX connectors, cables to see if they are linked properly. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity. [. . . ]