User manual BEGLEC BTX 300 SW V1.0

[. . . ] DANGER ~ GEVAAR ~ GEFAHR ~ PELIGRO ~ PERIGO ! WARNING: DANGER!never expose the lens to direct sunlight, even for a short period. This may damage the light effect or even cause fire!n'exposez jamais la lentille directement aux rayons de soleil, même pendant un bref instant. [. . . ] Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. Color Change--Blackout while change color Select BL. O. Color Change, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal while changing color) or Yes (blackout while change color), Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. Gobo Change--Blackout while change gobo Select BL. O. Gobo Change, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select No (normal while changing gobo) or Yes (blackout while changing gobo), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. BRITEQ® 12 BTX-300SW DMX Functions Enter menu mode, select DMX Functions, press ENTER button to confirm, use UP and DOWN button to select DMX Address, DMX Channel Mode, View DMX Value or W-DMX Setting. DMX Address--DMX512 address setting Select DMX Address, press ENTER button to confirm, the present address will blink on the display, use UP and DOWN button to adjust the address from 0 to 512, press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. DMX Channel Mode--channel mode Select DMX Channel Mode, press ENTER button to confirm, present channel mode will blink on the display, use UP and DOWN button to select Mode1 (22 channels mode) or Mode 2 (22 channels mode) or Mode 3 (29 channels mode), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. View DMX Value Select View DMX Value, press ENTER button to confirm. Channel function and its value will show on the display, use UP and DOWN button to view other DMX value. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. WDMX Setting--wireless control setting (For the unit with wireless receiver built-in only) Select WDMX Setting, press ENTER button to confirm. Use UP and DOWN button to select Active, Retransmit or Reset Memory, press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. BRITEQ® 11 BTX-300SW Lamp Setting Attention: The lamp will not be on unit detected temperature is lower than 45°C. Enter menu mode, select Fixture Setting, press ENTER button to confirm, use UP and DOWN button to select On/Off, State/Power on, Off Via Dmx, On if Dmx on, Off if Dmx off, Cooling Mode, Ignition Delay or Low Power Delay. . On/Off--Turn on/off the lamp Select On/Off, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select On (lamp on) or Off (lamp off), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. State/Power On--Lamp state while power on Select State/Power On, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select On (Lamp on while power on) or Off (Lamp off while power on), press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode. Off Via DMX--Turn off the unit via DMX controller Select Off Via DMX, press ENTER button to confirm, present mode will blink on the display, use UP and DOWN button to select Yes (turn off the unit via DMX controller available) or No (turn off the unit via Dmx controller impracticable), press ENTER button to store. [. . . ] One of the channels is not working well 1. The stepper motor might be damaged or the cable connected to the PCB is broken. The motor's drive IC on the PCB might be out of condition. BRITEQ® 27 BTX-300SW BRITEQ® 28 BTX-300SW D. The lamp is cutting out intermittently 1. [. . . ]