User manual BEGLEC CDX-2 V 1.2

[. . . ] Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Congratulations and thank you for buying this SYNQ® product. Please read these operating instructions carefully so you will know how to operate this product properly. [. . . ] Show information with MP3 files: If the MP3 tracks contain ID3tags, push the rotary switch 1x to show the folder name. FOLDER Button: This button is used to toggle between FOLDER and TRACK mode. AUTO LOOP Button: This button is used for 2 different functions: Loop is NOT playing: When no loop is playing you can easily create an automatic 4-Beat loop by pressing this button. Loop is playing: When a loop is playing you can enter loop cut/extend mode by pressing this button. In some rare cases the automatic beat counter doesn't count as it should do (beats are out of the normal range or there's simply no beat to detect). In these cases you can help the beat counter by manually tapping this button to the rhythm of the beat. You can switch back to the automatic beat counter by pressing the TAP button until the "AUTOBPM" in the right upper corner of the display turns on. PITCH RANGE % Button: Every time you press this button, you will change the scale of the speed slider. This function allows you to make adjustments to a tracks speed using the pitch control without altering its tonal pitch. Most of the common functions are explained in the previous chapter "controls and functions" In this chapter we talk about the functions that need a little more explanation. SOME GENERAL FUNCTIONS: SLEEP MODE: The CD player automatically shuts off the transport and laser after about 15 minutes (when in pause or cue mode). This extends the life of your motor drive and laser. During sleep mode the display shows the word "SLEEP". To wake up the player, just press the cue or play button, the display turns to normal and is ready to receive instructions. PLAY: appears while the unit is playing a CD. PAUSE: appears while the player is in pause or cue mode. CUE: appears when the master cue point is programmed. Put a disc in both players and start playback on one of the units. Alternately a track will be played from both units until the relay function is disengaged. You can always put a new CD in the player that is waiting in pause. In this way you can create an endless program, perfect for use in pubs etc. NOTE: by switching on the relay function you automatically put both players in single mode. [. . . ] " if you press the YES button (PITCH BEND+ button), all track information for that CD will be deleted in the permanent memory. " if you press the YES button (PITCH BEND+ button), the entire permanent memory will be erased. The complete internal memory is permanently lost! RECALLING "HOT CUE POINTS/LOOPS" FROM PERMANENT MEMORY: Permanent cue points are stored on track level, not on CD level. [. . . ]