User manual BEGLEC DMC-1000 V 1.0

[. . . ] `t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Congratulations and thank you for buying this SYNQ product. Please read these operating instructions carefully so you will know how to operate this product properly. [. . . ] SETUP ­ 2 OR 3 DECKS For each deck follow the instruction for "simple setup ­ 1 deck". PLAY: appears while the unit is playing a CD. PAUSE: appears while the player is in pause or cue mode. CUE: appears when the player is waiting at the CUE-point. TOUCH INDICATOR: appears when the touch sensitive part of the jog wheel is active. aLPHANUMERIC DISPLAY: Shows all kinds of important information like effect parameters , loop information , ID3-tags , . BPM DISPLAY: the automatic beat counter shows the number of Beats Per Minute on the display. (press the TAP button for 2seconds to switch to automatic mode) MEMORY BUCKET: shows the status of the buffer memory needed for anti-shock and some special functions. SINGLE: appears when the unit is set to play just one track at a time. When it is not shown, the CD plays continuously through all tracks. TRACK indicator: shows the number of tracks available in your current selection. Standard lookup: (no Q-Dbase) the track numbers in the current folder (M) are shown. Q-Dbase lookup: the track numbers that correspond to your Q-Dbase pre-selection. FOLDER/SEARCH KEY indicator: the information depends on the lookup mode you selected. Starts flashing at the end of each track to alert the user to take action. During loop playback: shows the time remaining until the end of the loop. This visual aid helps you to see where and when the seamless loop starts again. PITCH DISPLAY: Shows the actual percentage of speed change, selected with the SPEED slider (30). The small red colored padlock is shown when the pitch lock function (Master Tempo) is active. A hard disk formatted in NTFS (mostly drives with big capacity) will NOT be recognized: such hard disk should be re-formatted in FAT32!(this can be done under Windows, we can't offer any support for this!) Note 2: the USB-slots on this player can each deliver 1A power to the connected hard disk. [. . . ] You will notice that all 4 HOT CUE buttons turn dark to indicate that the HOT CUE buttons are empty. USING THE "PERMANENT MEMORY": For security reasons the cue points and loops stored in the HOT CUE buttons are not automatically stored to the permanent memory. This means that if you recall a set of cue points and loops from permanent memory to the HOT CUE buttons (which is track memory), you can change, edit and delete them as much as you want. The permanent memory will not be affected until you make a backup of the HOT CUE buttons to permanent memory. [. . . ]