Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEGLEC FL-1800. We hope that this BEGLEC FL-1800 user guide will be useful to you.
Lastmanuals help download the user guide BEGLEC FL-1800.
Manual abstract: user guide BEGLEC FL-1800DATASHEEET
Detailed instructions for use are in the User's Guide.
[. . . ] Main Office/Factory: Geni Electronics Co. , Ltd. 22, Chung Cheng 5th Street Yung Kang Tainan Hsien, Taiwan Tel: 886-6-253-8513 Fax: 886-6-253-8685 Showroom: Geni Electronics Co. , Ltd. Taipei World Trade Center, Room 3A-04 No. 5, Section 5, Hsin Yi Road, Taipei, Taiwan Tel: 886-2-2722-2910 Fax: 886-2-2722-2918 Thank you!
Appendix
FL-1800 Golden Strobe Up Panel
C B A
Get the best -- get Geni!
Geni Quality Sets the Standard
4
Description
A high-powered, 2000W strobe light with manual and remote control, Golden Strobe FL-1800 features controllable flash speed, quiet operation, lasting value.
Inspection
Every Golden Strobe (FL-1800) is thoroughly tested at the factory and shipped in perfect condition. [. . . ] Product contains no user serviceable parts. Refer servicing to qualified technicians only. Plug strobe power cord into appropriate mains power supply. Turn the flash speed dial (See Appendix. A) on upside of unit back to adjust the flash speed. (There is a small, white adjustment knob on the unit. This SVR can be adjusted with a screwdriver. Note, however, that this SVR is adjusted to the optimal position at the factory. !
Remote Control Operation
For best results, use Geni FL-01C or FL-34C controllers. Abide by controller user manual specifications regarding the number of strobes that can be linked to one controller. Plug one end of a mono (not stereo) microphone signal cable with standard 1/4-inch mono microphone jacks (See Appendix. B) into the Signal Input connector on upside of unit. Plug the other end of the cable into the signal output socket on the controller. If desired, connect another strobe: Plug one end of another signal cable into the Signal Output socket (See Appendix. C) on the upside of the first strobe; Plug the other end of the signal cable to the Signal Input socket on the upside of the second strobe. Follow the same procedure to link more strobes, if desired. Set all strobe manual control knobs to the Off (no flash) position. Refer to your strobe controller user manual for operating instructions. Plug strobe and controller mains power cords into proper electric power supply. !
1
Troubleshooting
Golden Strobe (FL-1800) are designed for years of troublefree use. [. . . ] If strobe flashes in manual control but not under remote control, replace the remote control cable. Use a cable that has worked properly with other strobes. If strobe still doesn't flash under remote control, check to see if other strobes operate properly with this controller. Refer servicing of strobe and controller to a qualified technician. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC FL-1800
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC FL-1800 will begin.
