User manual BEGLEC IR-5C

[. . . ] Technical Specifications IR-7S/IR-7B/IR-5C Power Fuse Lamp Dimension Weight AC 120V~60Hz or AC 230/240/250V~50/60Hz 20mm Glass 10A Fast Blow MSD 250/2 695 x 340 x 250 mm (IR-7S/IR-7B) 360 x 340 x 250 mm (IR-5C) 15 kg 9. 2kg (IR-7S/IR-7B) (IR-5C) IR-6S/IR-6B/IR-6SD/IR-6BD/IR-5S/IR-5B/IR-4C Power Fuse Lamp Dimension Weight AC 120V~60Hz 20mm Glass 6. 3A Fast Blow ELC 24V 250W CDM 150W (IR-6SD/IR-6BD) 695 x 340 x 250 mm (IR-6S/6B/6SD/6BD/5S/5B) 360 x 340 x 250 mm (IR-4C) 10. 6 kg (IR-6S/IR-6B/IR-5S/IR-5B) 10. 7 kg (IR-6SD/IR-6BD) 8 kg (IR-4C) AC 230/240/250V~50/60Hz 20mm Glass 5A Fast Blow IS-6S/IS-6B/IS-4/IS-3 Power Fuse Lamp Dimension Weight AC 120V~60Hz 20mm Glass 6. 3A Fast Blow ELC 24V 250W 685 x 380 x 200 mm (IS-6S/IS-6B) 375 x 380 x 200 mm (IS-4/IS-3) 9. 4 kg (IS-6S/IS-6B) 7. 5 kg (IS-4/IS-3) AC 230/240/250V~50/60Hz 20mm Glass 5A Fast Blow User Guide WWW. BEGLEC. COM Innovation , Quality , Performance . 7. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which TABLE OF CONTENTS 1. Technical Specification 2. 1 Inserting/Exchanging rotating gobos 2. 2 Beam Angel 3. [. . . ] · Accurate focusable optics system and ultra smooth stepping motors. (IR-7S/IR-7B/IR-6SD/IR-6BD/IR-6S/IR-6B/IR-5S/IR-5B/ 5A IS-6S/IS-6B) · IR-7S/IR-7B Independent gobo wheel with 7 rotating, replaceable gobos plus open, including 4 metal, 2 glass and 1 effect gobos with shaking effect, Independent color wheel with 9 dichroic colors with rainbow effect, and independent shutter & dimmer. · IR-6S/IR-6B Independent gobo wheel with 14 gobos plus open and blackout, including 10 metal, 1 replaceable gobo, 2 glass and 1 effect gobos with shaking effect, Independent color wheel with 11 dichroic colors with rainbow effect, and independent shutter & dimmer. · IR-5C Independent gobo wheel with 7 rotating, replaceable gobos plus open, including 1 metal, 2 glass, 1 effect, 1 frost gobos, and 2 color temperature filters (5600k & 3200k) with shaking effect, Independent color wheel with 9 dichroic colors with rainbow effect, and independent shutter & dimmer. · IR-4C Independent gobo wheel with 14 gobos plus open and blackout, including 7 metal, 1 replaceable, 1 effect, 1 frost, 2 glass, gobos, and 2 color temperature filters (5600k & 3200k), with shaking effect, Independent color wheel with 11 dichroic colors with rainbow effect, and independent shutter & dimmer. · IS-6S/IS-6B/IS-4 Professional multi-gobo rotator 14 gobos plus open and blackout, including 10 metal, 1 replaceable gobo, 2 glass and 1 effect gobos, with shaking and shutter effect, Independent color wheel with 11 dichroic colors with rainbow effect. · IS-3 Professional multi-gobo rotator 14 gobos/colors plus open and blackout, including 10 metal, 1 replaceable gobo, 2 glass and 1 effect gobos, with shaking and shutter effect. 2. 1 Inserting/Exchanging rotating gobos ( For IR-7S/IR-7B/ IR-5C only !Install the gobos with the device switched off only. Unplug from mains before! Open the cover by loosening the fastening screw at the sides of the cover. If you wish to use other forms and patterns as the standard-gobos, or if the gobos are to be exchanged, remove the fixation ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the fixation-ring together and insert it in the front of the gobo. 6A CAUTION!Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be opened! IS-6S/IS-6B/IS-4 ( IS-4 is a 4-channel gobo rotator ) IR-6SD/IR-6BD/IR-6S/IR-6B/IR-4C ( IR-4C is a 4-channel color changer) 7A 2. 2 Beam Angel 3. Lamp In case of replacement of the lamp or maintenance, do not open the fixture within 15 minutes until the unit cools down after switching off. MSD 250/2 GY 9. 5(IR-7S/7B/IR-5C) CDM ( IR-6SD/ IR-6BD ) ELC 24V 250W (IR-6S/IR-6B/IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3) Diagram for lamp changing Because of its high internal pressure, there might be a risk that the Discharge lamp would explode during operation. The lamp emits intense UV radiation which is harmful to the eyes and skin. The high luminance of the arc can cause severe damage to the retina if looks directly at the lamp. 1. Always switch off the main supply and never 8A handle the lamp or luminaries when is hot. If this happens, clean the lamp with denatured alcohol and wipe it with a lint free cloth before installation. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode. Once the required mode has been selected, press the ENTER button to setup or it will automatically return to the main functions without any change after idling 8 seconds. To go back to the functions without any change press the MENU button. [. . . ] How To Control The Unit You can operate the unit in three ways: 1. By master/slave built-in preprogram function 2. By IL-0824 ( please refer to the user guide of iLead controller ) or universal DMX controller 13A No need to turn the unit off when you change the DMX address, as new DMX address setting will be effected at once. Every time you turn the unit on, it will show its item number on the display and move all the motors to their `home' position and you may hear some noises for about 20 seconds. [. . . ]