User manual BEGLEC MCD 580 V 1.1

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Thank you for buying this JB Systems® product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] CLEANING THE CD-PLAYER: Clean by wiping with a polished cloth slightly dipped with water. Do not use volatile liquids such as benzene or thinner which will damage the unit. CONNECTIONS Connect the mini-DIN8 cable between the control unit and the main unit (CD loader) Use the supplied cinch cables to connect the audio outputs of the CD player with the CD or line inputs on your mixing unit. CONTROL connector: connect this connector to the control unit, using the supplied mini-DIN8 cable. aUDIO outputs: Output for the audio signals from the CD-player. Use the supplied cinch/cinch cable to connect this output to a CD/line input of your mixing unit. dIGITAL OUT socket: Use this connector to connect the digital signal (S/PDIF format) to the input of a digital amplifier or digital recorder (ex. Mini disc) MAINS input: connect the CD player to the 230V AC mains, using the supplied power-cord. OPEN/CLOSE button: press this button to open and close the disc tray. These buttons are disabled during playback. SEARCH WHEEL (OUTER RING): This wheel has 4 forward and 4 backward speed positions for searching through songs. The more you turn the wheel in either direction the faster you will search through the music. JOG WHEEL (INNER RING): This jog wheel serves 2 functions depending on the mode you are working in. The jog wheel acts as a slow frame search (1/75sec) control when the CD is not playing but either paused or set to a cue point. To set a new cue point, spin the wheel and press PLAY when you have determined the proper position. press CUE to return to the "CUE POINT". The jog wheel temporarily bends the pitch of the music up to +/-16% if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. the amount of pitch change is determined by the speed of rotation. TRACK SEARCH Buttons: These buttons are used to select the track to be played. press the +10 button to skip 10 tracks at once. CUE button: Pressing the CUE button during play provides an immediate return to the position at which play was started. Playback is started immediately from the programmed cue point for as long as the CUE button is pressed. [. . . ] Press the LOOP button again to set the end of the loop: led is lit while the music starts playing in loop mode. Press the LOOP button again to stop the loop mode: the led turns off. Starts flashing at the end of each track to alert the user to take action. SINGLE/CONTINUE: "single" appears when the unit is set to play just one track at a time. [. . . ]