User manual BEGLEC MCD 680 V 1.0

[. . . ] `t Hofveld 2 ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Check the contents: Check that the carton contains the following items: Main unit Control unit Operating instructions 2 cinch cords 1 mini-DIN8 cable 1m 2 fader start cables 1 power cord Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] In loop edit mode pressing the OUT button stops the loop editing and saves the new loop endpoint. RELOOP/STUTTER button: This button has 3 functions: RELOOP: When a loop was programmed and you have hit the OUT button, press the reloop button to enter the loop again. (intro and end points of the loop are unchanged) STUTTER: When a loop is playing you can press this button to restart the loop at once. You can also press this button when a track is not playing in loop. Every time the RELOOP/STUTTER button is pressed, it will restart the music from the preprogrammed cue point. OPEN/CLOSE button: press this button to open and close the disc tray. These buttons are disabled during playback. ENTER EDIT LOOP MODE: When a loop is programmed (LOOP IN and OUT/EXIT buttons are on) you can enter loop edit mode by pressing the RELOOP/STUTTER button until the display shows "Loop Edit". CUE button: Pressing the CUE button during playback provides an immediate return to the position at which play was started. Playback starts immediately from the programmed cue point for as long as the CUE button is pressed. The CD player jumps back to the cue point as soon as the CUE button is released. Also with the unit in pause mode (Play/Pause button blinks) the jog wheel is used to set a different start point. By pressing "PLAY/PAUSE" or "LOOP IN" button followed by "CUE", you can confirm this new cue point. PLAY/PAUSE button: every time you press the PLAY/PAUSE button the CD player changes from play to pause or from pause to play. the button blinks as long as the player is set to pause. TRACK/FOLDER button: This button has several functions: Switch between FOLDER and TRACK mode: press the FOLDER button and left SEARCH BUTTON (9) together to switch between FOLDER and TRACK mode. Refer to the chapter "how to use" to learn more about these modes. FOLDER mode - switch between folders: press the FOLDER button together with the TRACK SEARCH buttons (8) to browse the different folders on the CD/CDROM. TRACK SEARCH buttons: These buttons are used to select the track to be played. In FOLDER mode, press the FOLDER button (7) together with the TRACK SEARCH buttons to select another folder. SEARCH buttons: used to search quickly inside a track. Press the left search button (search back) together with the FOLDER button (7) to switch between FOLDER and TRACK mode. [. . . ] RESTART A LOOP: This can be done in 3 ways: When a loop is programmed and you left it by pressing the OUT button, just press RELOOP to restart the loop. When a loop is programmed and you left it by pressing the OUT button, just press OUT again to restart the loop. The point where you pressed OUT is now programmed as the new endpoint of the loop. When the loop is still playing, press the RELOOP button to restart the loop immediately. [. . . ]