Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEGLEC ME 2. We hope that this BEGLEC ME 2 user guide will be useful to you.
Lastmanuals help download the user guide BEGLEC ME 2.
Detailed instructions for use are in the User's Guide.
[. . . ] â· To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. â· This unit is for indoor use only. â· Don't place metal objects or spill liquid inside the unit. [. . . ] CLEANING THE APPLIANCE: Clean by wiping with a polished cloth slightly dipped with water. Do not use volatile liquids such as benzene or thinner which will damage the unit. Except for microphones and headphone, all connections are cinch. use good quality cinch-cinch cables to prevent bad audio quality. (example: JB Systems code: 2-0370) For more information on connections, please refer to the next chapter. Be sure to turn off the mixer before you make changes to the different connections. In this manual we talk about "line inputs". This is a global name for inputs with a level between 750mV and 2V. Power (Power ON/OFF switch): Used to turn on the power of the mixer. VU-meters: Used to monitor the level of the different audio signals. With the channel faders you can change the input level of each connected audio source. Make sure the levels do not exceed 0dB (or 100%). The audio risks to be distorted when the signal level comes in the red zone of the VU-meter. You can also use the VU-meter to compare the signal level of the input channels with that of the master output. Equalizer controls: When the equalizer is switched on, you can use these 3 faders to change the audio to your personal taste. Echo level control: Used to control the level of the echo signal that will be mixed with the original. Use it to make the perfect balance between the original and the effect signal. Echo repeat control: Used to control the feedback or number of echoes you want to create. Together with the delay time (8) you will be able to create the echo you desire. Echo Delay time: With this control you can set the length of the delay time. Together with the repeat time (7) you will be able to create the echo you desire. You can listen to any input channel while its channel fader is closed. [. . . ] This output is not influenced by the master volume (12) 30. master output: Used to connect an amplifier. The output level can be set by the master volume (12) 31. mains fuse: main fuse to protect the mixer. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC ME 2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC ME 2 will begin.
