User manual BEGLEC MINI COLOR 7TC V1.0

[. . . ] 3. 4--AUTO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. 3. 5--ADDRESS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. 3. 6--RUN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11. 3. 7--PERSON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. [. . . ] This product can also be installed for use in signage and advertising using the dynamic functions available with DMX512 control. Direct input of DMX512 signal allows the units to be controlled from any DMX512 controller. This product can be operated as a single unit or in multiple units for large applications. The specially developed controller that allows the product to be controlled independent of the DMX512 controller enables the user to create and edit a wide range of custom programs. All programs can be touch-button displayed or scheduled to START and END at scheduled times. When programs have been created or edited in the controller, it is also possible to trigger these programs using the DMX IN function when connected to a DMX512 controller. 1. 2 PRODUCT FEATURES LED FIXTURE * RGB Dimmer 0-100% * Strobe * Automatic programs * LCD display * Display control 'lock-out' * Direct DMX512 input * Independant ID address * Stand-alone/ Slave ID ADDRESS SELECTION CH9 is used to select the target ID address. Each independent DMX address may have upto 66 independent ID addresses. An ID address of 0 will activate all ID address locations. AUTO CH7 selects the preset AUTO programs AT. 01-AT10 or the custom AUTO programs PR. C1-PR. 10 When activating the custom AUTO programs PR. C1 to PR. 10 then it is possible to control the Step time and fade time using Ch2 and Ch3 respectively. 4 USING A DMX512 CONTROLLER 16 2009. 12. 9 1 PRODUCT(GENERAL) 1 2009. 12. 9 1. 3 TECHNICAL SPECIFICATIONS LED MODULE CHANNEL VALUE 200 210 211 209 ID20 ID21 ID22 FUNCTION 9 LED MODULE: Voltage Rated Power LED/Unit 100~240V. . . 50/60Hz 35W 253 254 255 ID64 ID65 ID66 7 X 3W Tri-RGB ARC 1 CHANNEL 1 2 3 VALUE 0 255 Environment Temperature -20 ~40 Cooling Dimensions Weight Forced air convection 240 x 210 x160mm 2. 5Kg FUNCTION RED 0 255 GREEN 0 255 BLUE ARC 1+D CHANNEL 1 2 3 4 VALUE 0 255 FUNCTION MASTER DIMMER 0 255 RED 0 255 GREEN 0 255 BLUE RGB+D CHANNEL VALUE RED FUNCTION GREEN BLUE MASTER DIMMER 0% MASTER DIMMER 0-100% DIMMER 100% STROBE 1-20HZ DIMMER 100% RGB+DS CHANNEL VALUE RED FUNCTION GREEN BLUE MASTER DIMMER 5 NO function 0-20Hz 1 PRODUCT(GENERAL) 2 2009. 12. 9 4 USING A DMX512 CONTROLLER 15 2009. 12. 9 CHANNEL VALUE AUTO 0 21 31 41 51 61 71 81 91 101 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 255 No function AUTO 1 AUTO 2 AUTO 3 AUTO 4 AUTO 5 AUTO 6 AUTO 7 AUTO 8 AUTO 9 AUTO 10 CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CUSTOM 5 CUSTOM 6 CUSTOM 7 CUSTOM 8 CUSTOM 9 CUSTOM 10 No function FUNCTION 1. 4 PHOTOMETRIC DATA PHOTOMETRIC DATA RED 370 93 41 23 15 LUX 3 2 1 0 1 2 3 2(0. 23) 4(0. 43) 6(0. 56) 8(0. 93) 10Distance(m) (1. 12Diameter(m)) 7 111 121 131 141 151 161 171 181 191 201 211 221 GREEN 740 185 82 46 30 LUX 3 2 1 0 1 2 3 2(0. 24) 4(0. 41) 6(0. 69) 8(1. 02) 10Distance(m) (1. 02Diameter(m)) BLUE 156 39 17 10 6 LUX 3 2 1 0 1 2 3 2(0. 23) 4(0. 42) 6(0. 60) 8(0. 88) 10Distance(m) (1. 12Diameter(m)) 8 0 255 AUTO SPEED ADJUSTMENT When using CH7, AUTO01-AUTO9, this function activated ID ADDRESS 0 10 20 30 40 50 60 70 9 19 29 39 49 59 69 79 89 99 109 119 129 139 149 159 169 179 189 199 ID1~ID66 ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 ID10 ID11 ID12 ID13 ID14 ID15 ID16 ID17 ID18 ID19 RGB 1174 293 130 73 47 LUX 3 2 1 0 1 2 3 2(0. 23) 4(0. 44) 6(0. 68) 8(1. 01) 10Distance(m) (1. 07Diameter(m)) 9 80 90 100 110 120 130 140 150 160 170 180 190 4 USING A DMX512 CONTROLLER 14 2009. 12. 9 1 PRODUCT(GENERAL) 15 15 15 15 3 2009. 12. 9 1. 5 SAFETY WARNING IMPORTANT ALWAYS READ THE USER MANUAL BEFORE OPERATION. PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA. This product must be installed by a qualified professional. Always operate the equipment as described in the user manual. A minimum distance of 0. 5m must be maintained between the equipment and combustible surface. The product must always be placed in a well ventilated area. Always make sure that the equipment is installed securely. DO NOT stand close to the equipment and stare directly into the LED light source. Always disconnect the power supply before attempting and maintenance. Always make sure that the supporting structure is solid and can support the combined weight of the products. The earth wire must always be connected to the ground. Do not touch the power cables if your hands are wet. 4 4. 1 USING A DMX512 CONTROLLER BASIC ADDRESSING Connect all of the units in series using standard DMX512 signal cable or the IP65 rated cable provided. Set the DMX512 address in the DMX menu. 4. 2 CHANNEL ASSIGNMENT Note: This product have three DMX512 channel configuration: STAGE 1 , ARC 1 , ARC 1+D , RGB+D and RGB+DS STAGE 1 CHANNEL 1 0 255 RED VALUE DIMMER FUNCTION ATTENTION 2 3 0 255 Ch2 will control the TIME if Ch7 choose custom01-10 GREEN 0 255 Ch3 will control the F ADE if Ch7 choose CUSTOM01-10 BLUE 4 0 255 MARCO This product left the place of manufacture in perfect condition. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual. [. . . ] When [UC] is selected, the RGB output are adjusted to a standard preset universal color which balances fixtures from different generations. . (Note that when used in this way, the CH9 ID function must be inactive (CH9=0)) 2. 3-2 DMX512 ADDRESSING WITH ID ADDRESS (STAGE 1 MODE) Connect the DMX512 controller to the units in series Each unit has 9DMX channels so the DMX Addresses should increase by increments of 9 (e. g. 1, 10, 19, 28. . . ) Each DMX Address may be used as many times as required. Any DMX address in the range from 001 to 512 may be used. [. . . ]