User manual BEGLEC MPT 200 V 1.0

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Check the contents: Check that the carton contains the following items: Main unit Control unit Operating instructions Pair of cinch cords 2 mini-DIN9 cables Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] To set a new cue point, spin the wheel then press PLAY or LOOP IN when you have determined the proper position. press CUE to return to the "CUE POINT". If the track is playing and the fast search function (4) is not active, the jog wheel temporarily bends the pitch of the music up to +/-32% by rotating the wheel clockwise to speed it up or counterclockwise to slow it down. the amount of pitch change is determined by the speed of rotation. If the fast search function (4) is active, you will be able to search at a higher speed through the current track. OPEN/CLOSE button: press this button to open and close the disc tray. These buttons are disabled during playback. TIME Button: The TIME button switches between elapsed playing time, remaining time in a selection and total remaining time of the disc. (standard = remaining /track) If the button is pressed for more than 1second, the player toggles between single and continuous play: Continuous play: the complete CD will be played without interruption. (mostly used in pubs) Single track: player stops at the end of each track and waits at the beginning of the next track. FAST SEARCH button: press this button to toggle the function of the JOG WHEEL(1) between fast search mode ("SEARCH" shown in the display) and normal mode. The fast search function is automatically turned off when the JOG WHEEL is not used for more than 10seconds. PLAY MODE: normally the JOG WHEEL is used as pitch bend tool to synchronize the beats of the playing track to another track. When the fast search mode is turned on, you can use the JOG WHEEL to search very quickly forward/backward inside the current track. PAUSE MODE: normally the JOG WHEEL is used to search very precisely (1frame precision) for the exact cue point. When the fast search mode is turned on, you can use the JOG WHEEL to search very quickly forward/backward inside the current track. LOOP IN button: Allows you to set the cue point without stopping the playback (CUE ON THE FLY). This button also sets the beginning of a seamless loop. The player starts to loop seamlessly until you press this button again to exit. When a loop is programmed but not active you can also restart the loop. The point where you press the button will be memorized as the new end point of the loop. In loop edit mode pressing the OUT button stops the loop editing and saves the new loop endpoint. [. . . ] Please note that you should always use the "disc at once" and "track at once" disc writing options!Although the MPT200 is capable of reading CD-R and CD-RW recorded at higher speeds, we suggest not using recording speeds more than x12 to increase readability. Always buy good quality brands for CD-R and CD-RW!If the disc is multi session, it will only play the first session: if the first session is CD-DA you can only play CD-DA tracks. [. . . ]