User manual BEGLEC PMD 8

[. . . ] It can be connected to keyboards or other electric instruments. tip = positive Ring = negative Sleeve = ground 3. PAD (-20dB) When you push this switch it attenuates the input signal with ­20dB. [. . . ] When the PFL switch is on, other channels are automatically cut off (see monitor section). INDICATION You can put a sticker on which you can write the input signal. UNBALANCED OUTPUT JACK CONNECTORS Tip = signal + Ring = ground Sleeve = ground (shield) 3. MASTER LEVEL DISPLAY It shows the output levels of the left and the right. Make sure you don't exceed +3dB, this to avoid distortion. LEFT MASTER FADER By adjusting the slider you control the mixed left output. DSP DIGITAL INDICATOR Indicating the effect which the dsp is working at. DSP PRESETS (9) and (10) are up presets and down presets. When you choose different presets, the correspondent number will change accordingly. When you push the presets, the led is on but there is nog effect output. Only when you push the enter key (13), there is correspondent effect output and the led will stop flashing. When the red led is on, please make the input level a little less. INTERNAL DSP There are 32 effects you can choose from. DSP ENTER When you choose your presets, please push the key and than the dsp is at the effect status that you choose. AUX INPUT Used with 1/4" stereo jack, you can connect it with stereo equipment or other external signal. tip = left signal Ring = right signal Sleeve = negative 2. [. . . ] LEFT AND RIGHT AUX EFFECT RETURN These are to be connected with other external processor. PHANTOM POWER SWITCH Control unit that supplies all the microphone inputs with 48V Phantom power. LEFT MASTER LEVEL CONTROL You can control the aux return level by adjusting the switch. [. . . ]