User manual BEGLEC PSX-12A V 1.0

[. . . ] This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers!CAUTION: To reduce the risk of electric shock, do CAUTION not remove the top cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. [. . . ] Balanced / unbalanced microphone input (jack + XLR) with volume control Balanced / unbalanced line input/output (XLR) with volume control. speakon output for optional passive cabinet. IEC input/output mains connectors Perfect for permanent installations Perfect for Portable use High power Woofer High power Compression Driver & Horn Built-in Rigging points Built-in 35mm stand adapter Monitor stand adapters included Built-in heavy duty carrying handle Heavy duty rubber feet. Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. â· Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. â· Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. â· To protect the environment, please try to recycle the packing material as much as possible. In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside. Always replace a damaged fuse with a fuse of the same type and electrical specifications! â· In the event of serious operating problems, stop using the appliance and contact your dealer immediately. â· Please use the original packing when the device is to be transported. â· Due to safety reasons it is prohibited to make unauthorized modifications to the unit. For the line level in/outputs you can use readymade XLR-cables such as our JB SYSTEMS codes 7-0063 (5m) or 7-0067 (10m). For the speaker output: you can use readymade cables such as our JB SYSTEMS codes 2-0505 (5m). of course you can also assemble the speaker cables yourself. Take care to use good quality speaker cable with at least 2x 2. [. . . ] This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers! Every information is subject to change without prior notice The PSX-cabinets also have a stand adapter on the bottom that can be used to put the cabinet on a proper and stable speaker stand. Examples of proper Speaker Stands are our SS-58, SS-AIR, LS-64, . Tighten the screw of the stand adapter to prevent the speaker from rotating during use. [. . . ]