User manual BEGLEC SUPER SOLAR

[. . . ] This device has been designed to produce decorative effect lighting and is used in light show systems. An extremely compact, DMX-controlled, LED effect Projects 34 sharp white beams (Super Solar White) or colored beams (Super Solar RGBW) with dynamic internal programs!0-100% dimming and ultra fast strobe function Adjustable rotation speed from extremely slow to very fast Different user modes for maximum flexibility: DMX-control: Super Solar white: 1 or 2 channels ~ Super Solar RGBW: 1 or 3 channels Standalone: automatic or sound activated with internal mic Master/slave: wonderful synchronized shows Optional CA-8 remote controller available Based on a powerful 10 Watt White or RGBW LED: Extremely brilliant beams compared to effects with halogen lamps More dynamic effects compared to effects based on halogen lamps No lamp replacements!Virtually no heat production Very low power consumption Lightweight (no lamp transformers needed) This symbol means: indoor use only This symbol means: Read instructions To protect the environment, please try to recycle the packing material as much as possible. [. . . ] Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. Check the contents: Check that the carton contains the following items: Operating instructions Super Solar White or Super Solar RGBW Hanging bracket + 2 bolts & 2 nuts This input receives instructions from a DMX-controller or from another Super Solar in master/slave mode. DMX output: 3pin female XLR-connector used to connect the Super Solar White/RGBW with the next unit in the DMX chain or with another Super Solar white/RGBW when used in master/slave mode. Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property. overhead rigging requires extensive experience!Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls. The device should be installed out of reach of people and outside areas where persons may walk by or be seated. Before rigging make sure that the installation area can hold a minimum point load of 10times the device's weight. Always use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. The device should be well fixed; a free-swinging mounting is dangerous and may not be considered! [. . . ] When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced. The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is detected. In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be cleaned monthly. The interior of the device should be cleaned annually using a vacuum cleaner or air-jet. [. . . ]