User manual BEGLEC VIBE-12 V 1.1

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. [. . . ] This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers!Both connectors are connected in parallel. This means that you can connect a second VIBE-12 in parallel. NEGATIVE = -1 Attention: when a second speaker is connected, the impedance drops from 8 to 4!In most cases you can only connect 2 cabinets together. However, if your amplifier supports 2 loads, you can connect up to 4 cabinets to each amplifier output. Cables to be used: You can use readymade cables such as our JB SYSTEMS codes 2-0505 (5m) or 2-0510 (10m) or 2-0525 (25m). of course you can also assemble the speaker cables yourself. Take care to use good quality speaker cable with at least 2x 2. You will also need a pair of Neutrik Speakon® NL4FC connectors. Your speaker cable has 2 conductors with different colours. Be sure to connect the same colour on each side of the cable to the corresponding contact!If you inverse the conductors, poor sound quality with a lack of low frequencies will be the result. The VIBE-12 cabinets have several rigging points using M10 inserts. [. . . ] Don't use any chemical solvents as they attack the enclosure!Stevige, houten MDF klankkast Harde polyurethaan verf voorkomt krassen Perfect voor permanente installaties Perfect voor mobiel gebruik High power 12" Woofer met ALU frame High power 1. [. . . ]